Taperssection.com
Gear / Technical Help => Playback Forum => Topic started by: Tim on March 11, 2005, 06:29:38 PM
-
Here are some pictures guys, I hope to review them after this weekend.. probably Monday. Until then these pics will have to do...
the quality of the build is very nice, the jacket seems very rugged.
cables in my hand, from top to bottom: Leegeddy's, Synergistic Research Alpha's, Home Depot 14Ga extension
(http://img.photobucket.com/albums/v411/tmarkham/leegeddyspeakercables2005-03-11002.jpg)
with a nickel to show relative size
(http://img.photobucket.com/albums/v411/tmarkham/leegeddyspeakercables2005-03-11005.jpg)
(http://img.photobucket.com/albums/v411/tmarkham/leegeddyspeakercables2005-03-11005.jpg)
I rolled the red and black sleeves down a bit to give me some more room to work with
(http://img.photobucket.com/albums/v411/tmarkham/leegeddyspeakercables2005-03-11007.jpg)
the jacket reminds me of the bettercables.com stuff
(http://img.photobucket.com/albums/v411/tmarkham/leegeddyspeakercables2005-03-11008.jpg)
(http://img.photobucket.com/albums/v411/tmarkham/leegeddyspeakercables2005-03-11009.jpg)
(http://img.photobucket.com/albums/v411/tmarkham/leegeddyspeakercables2005-03-11012.jpg)
-
Is that a biwire set or two conductors per run?
They look nice. Is it telfon coated silver?
-
2 conductors per run
not positive on the teflon so I'll leave that up to Marc. It seems very similiar to the bettercables.com stuff so I think so but I'm not positive, sorry.
-
nice tim!
-
Thanks Tim! +T for the pics
Here's what marc (hope ya don't mind me posting this :) ) PMed me about the speaker cables:
>>
they are quad runs. 4 wires per channel.
they are made of teflon jacketed silver clad wires, twisted in a quad config. i don't use the same wires as the interconnects since i don't need shielding. these are much heavier guage wires. <<
-
cool, I couldn't find any of that info... thanks Brian
I'll get you in 12 hours :)
-
Thanks Tim! +T for the pics
Here's what marc (hope ya don't mind me posting this :) ) PMed me about the speaker cables:
>>
they are quad runs. 4 wires per channel.
they are made of teflon jacketed silver clad wires, twisted in a quad config. i don't use the same wires as the interconnects since i don't need shielding. these are much heavier guage wires. <<
late day at the office for me....
yes, to answer the question about the wires they are silver plated ofc with teflon insulation. the quad wires are then further wrapped in teflon jacket.
tim, if you look at the bare wires you'll see that they are almost bright white, which is a great indicator of high silver content. these cables are all mil-spec wires that are used by our armed forces and NASA.
marc
-
tim, if you look at the bare wires you'll see that they are almost bright white, which is a great indicator of high silver content. these cables are all mil-spec wires that are used by our armed forces and NASA.
I actually noticed that today... good info Marc, thanks...
-
Just ordered a pair. :)
-
Just ordered a pair. :)
good choice... :)
-
Just ordered a pair. :)
good choice... :)
no doubt, i dont think marc has made one shitty cable 8)