so does the -20db pad need engaged for this to normally work right ???
or can i roll straight to the show and just run like i would w/ mics ???
would i be better off running rca>jb3 line in ???
what would yinz do ???
thanks,
bean
I'd guess the pad would help, as SBD level signals are usually hotter than mic levels. The V3 gain is clean, so why not play it safe?
Don't engage phantom power!
Quote from: MattD on March 16, 2005, 03:11:45 PM
I'd guess the pad would help, as SBD level signals are usually hotter than mic levels. The V3 gain is clean, so why not play it safe?
Don't engage phantom power!
ahh, almost forgotthe phanton thing, thankfully, i ALWAYS dis-engage it after each show:)
its just a pain to get my v3 out of its cage, tomake a quick adjustmentlikethat, but whatever, i'lldo it :)
i just hate to engage the -20db pad and then get there and want to run my mics :(
what i did was print out the schematic of the v3 internals. cut out the section to contain the -20 pad and highlight the jumpers that need switched. laminated it and taped it to the bottom of my v3
i always pack a small screwdriver. you never know whats gonna happen and you may need the -20 pad
yeah, small screwdriver and a tweezer and it's a 2 minute job...
Quote from: caymanreview on March 16, 2005, 03:34:15 PM
what i did was print out the schematic of the v3 internals. cut out the section to contain the -20 pad and highlight the jumpers that need switched. laminated it and taped it to the bottom of my v3
i always pack a small screwdriver. you never know whats gonna happen and you may need the -20 pad
nice idea +T
Quote from: dmonterisi on March 16, 2005, 03:35:37 PM
yeah, small screwdriver and a tweezer and it's a 2 minute job...
two minutes sober or two minutes showber?
Quote from: dmonterisi on March 16, 2005, 03:35:37 PM
yeah, small screwdriver and a tweezer and it's a 2 minute job...
yep. and with my print out, i can do it in even the worst shape 8)
Quote from: Shrinkynuts McAngrypants on March 16, 2005, 03:36:25 PM
Quote from: dmonterisi on March 16, 2005, 03:35:37 PM
yeah, small screwdriver and a tweezer and it's a 2 minute job...
two minutes sober or two minutes showber?
depends on the type of showber...could be uh oh spaghettio's...but you can always get there early and see what the scene is before ingesting.
Quote from: dmonterisi on March 16, 2005, 03:39:03 PM
but you can always get there early and see what the scene is before ingesting.
where's the fun in that?
;)
Quote from: Shrinkynuts McAngrypants on March 16, 2005, 03:39:50 PM
Quote from: dmonterisi on March 16, 2005, 03:39:03 PM
but you can always get there early and see what the scene is before ingesting.
where's the fun in that?
;)
you're asking the wrong guy, i don't own a rig.
:flippa:
Quote from: dmonterisi on March 16, 2005, 03:41:29 PM
Quote from: Shrinkynuts McAngrypants on March 16, 2005, 03:39:50 PM
Quote from: dmonterisi on March 16, 2005, 03:39:03 PM
but you can always get there early and see what the scene is before ingesting.
where's the fun in that?
;)
you're asking the wrong guy, i don't own a rig.
i do have a couple of medals from the 02-04 taping olympics...and one time where i missed the platform, damned pause button.
Quote from: dmonterisi on March 16, 2005, 03:45:19 PM
Quote from: dmonterisi on March 16, 2005, 03:41:29 PM
Quote from: Shrinkynuts McAngrypants on March 16, 2005, 03:39:50 PM
Quote from: dmonterisi on March 16, 2005, 03:39:03 PM
but you can always get there early and see what the scene is before ingesting.
where's the fun in that?
;)
you're asking the wrong guy, i don't own a rig.
i do have a couple of medals from the 02-04 taping olympics...and one time where i missed the platform, damned pause button.
hahahaha
i ALWAYAS carry a screwdriver to fit the v3 just right and i already printed out what i needed to do if ineed to do it at the show, just slide jumpers j3/j4 + j14/j15 INWARD toward each other, simple as pie :)
thanksguys
+T's
Quote from: Moke on March 16, 2005, 03:46:05 PM
Bean,
I've run sbd>V3 on a couple of occasions, and never had an issue (both for Ras M.). If I remember correctly I ended up adding 5-10dB of gain.
Grab the tape out of the board, and if its too hot, have them back it down a teence.
+T moke, i'll def try it out normal during sndchck
and i may be able tohave them back them down a bit since im archiving doodis and know them resal well, i'll just tell the soundguy toback her down ge3ntly
jcaledun and i both ran SBD (balanced signal) >V3>JB3 for yonder shows in oxford, memphis, and knoxville. no -20 db pad was used... it worked fine... didn't have to turn up the gain at all though.
Quote from: keepongoin' on March 16, 2005, 03:57:39 PM
jcaledun and i both ran SBD (balanced signal) >V3>JB3 for yonder shows in oxford, memphis, and knoxville. no -20 db pad was used... it worked fine... didn't have to turn up the gain at all though.
ive watched someone do the same thing with ymsb and clip the shit out of his v3...
You know better than to post this in the Open Forum, Bean. ::)
(http://www.ssgecom.com/products/Images/ftbl038_l.jpg)
Quote from: Brian Skalinder on March 16, 2005, 04:06:15 PM
You know better than to post this in the Open Forum, Bean. ::)
i know, sorry, needed a real quick q answered, and i gotta keep ya on your toes ;)
Quote from: wboswell on March 16, 2005, 04:23:19 PM
(http://www.ssgecom.com/products/Images/ftbl038_l.jpg)
whats that william ???
a flag bean, from football ??? come on now, your slacking
ok, i just dont get it ;)
Quote from: dmonterisi on March 16, 2005, 03:35:37 PM
yeah, small screwdriver and a tweezer and it's a 2 minute job...
sounds like Daryans love life.nevermind
Quote from: spreadheadtom on March 16, 2005, 05:02:54 PM
Quote from: dmonterisi on March 16, 2005, 03:35:37 PM
yeah, small screwdriver and a tweezer and it's a 2 minute job...
sounds like Daryans love life.
nevermind
LMAO!!!another + in 12!!
marc
Quote from: Bean on March 16, 2005, 04:36:35 PM
ok, i just dont get it ;)
Its a penalty flag. You know, the ref throws a flag after a player commits a foul...
make sense ??? ??? ;D :P :-* ;) ;)
8)
Quote from: wboswell on March 16, 2005, 05:13:03 PM
Quote from: Bean on March 16, 2005, 04:36:35 PM
ok, i just dont get it ;)
Its a penalty flag. You know, the ref throws a flag after a player commits a foul...
make sense ??? ??? ;D :P :-* ;) ;)
8)
gotcha ;)
I keep my V3 in a cage too with a short pair of RA XLR interconnects 'permanently' attached, and taking it apart in the field is something I'd rather not do.
I just keep a pair of these in my bag and use 'em if I get thrown a SBD feed...
http://www.bhphotovideo.com/product/68085/AUAT8202/REG/2487/Audio-Technica_AT8202_In-Line_Attenuator
Quote from: wboswell on March 16, 2005, 04:23:19 PM
(http://www.ssgecom.com/products/Images/ftbl038_l.jpg)
I'd like to see the officials throw a few more flags around this place... nice call William 8)
ummm, no -20db pad needed trhankfully :)
transferring jb3>HD now :)