Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: F.O.Bean on March 25, 2005, 03:59:37 PM

Title: Matrix Programs ???
Post by: F.O.Bean on March 25, 2005, 03:59:37 PM

iknowthat Cool Edit Pro does this, but does wavelab 4.0/5.0/samplitude6.0/soundforge 7.0 do this ???

Title: Re: Matrix Programs ???
Post by: momule on March 25, 2005, 05:55:43 PM

samplitude studio 6.0 will do this for you..  I like it a bit better than SF7 but am just more familiar with SF. so I use for all other mastering

just go
file > New virtual Project (select how many tracks,sample rate) >then select one of the project boxes. (it will put an orange outline on which box is selected.) >open your first track.
Then select the other project Box and open your second track. and wammo your off an running.
should be able to handle it from there.

LMK if ya need furthur help. although I have not used it a whole lot so Some of the ?'s I may be able to answer and some I may not.

Nick

Title: Re: Matrix Programs ???
Post by: F.O.Bean on March 25, 2005, 06:13:29 PM

thanks nick, +T

ummm, so im gonna do a stage lip/sbd matrix from last nite,but was wondering how i know theyre synced up? and also, if theyre off, do i cut a small bit from the 'longer' source so they meet up ???

and one more, should i cut the sets up into 'chunks' so they can be easily aligned ???

thanks!

bean

Title: Re: Matrix Programs ???
Post by: Busman Audio on March 25, 2005, 06:23:50 PM

Cut the sets into chunks for sure. It will make alignment much easier. Usually you have to time stretch or "shrink" one of the sources just a little to match up.

Title: Re: Matrix Programs ???
Post by: Swampy on March 25, 2005, 06:39:30 PM

You probably will want to cut the SBD so there are no noticeable bliips inbetween songs...

Title: Re: Matrix Programs ???
Post by: F.O.Bean on March 25, 2005, 06:41:58 PM

alex-did you 'time stretch' or 'shrink' the last one you did ???

i dont even havethe SBD source yet, i have to get it off of jef-0, but i justw anna get a little feel for it, ya know ;)

Title: Re: Matrix Programs ???
Post by: momule on March 25, 2005, 06:43:07 PM

I leave my AUD tape as it is. and cut the SBD if needed to match the aud then mixdown (export) 2 tracks and track it from there.

Title: Re: Matrix Programs ???
Post by: momule on March 25, 2005, 06:44:45 PM

just take two sources of another show you have and play with two of the same tracks from a different recording. if ya just wanna get the feel of er'

Title: Re: Matrix Programs ???
Post by: F.O.Bean on March 25, 2005, 07:04:08 PM

Quote from: Momule (AKA powerboatman) on March 25, 2005, 06:44:45 PM

just take two sources of another show you have and play with two of the same tracks from a different recording. if ya just wanna get the feel of er'

great idea, +T :)

Title: Re: Matrix Programs ???
Post by: Swampy on March 26, 2005, 10:22:06 AM

Quote from: Bean on March 25, 2005, 06:41:58 PM

alex-did you 'time stretch' or 'shrink' the last one you did ???

i dont even havethe SBD source yet, i have to get it off of jef-0, but i justw anna get a little feel for it, ya know ;)

No. The SBD was a fraction of a second longer by the end, so I would put cuts in the SBD and pull it to where it needed to be. when you started getting into the stretch thing, first, its hard to get it to stretch exactly right, second it can make it sound weird. When I was overlapping the sbd, it was FRACTIONS of a second durring silence inbetween songs that you would never be able to tell. Maybe next time you come up for a show you could come over like an hour early and I could walk you through the basics...

Title: Re: Matrix Programs ???
Post by: F.O.Bean on March 26, 2005, 03:48:17 PM

thanks odog :)

i HATEthe search on this site w/a passion, it never works how i want it to :(