Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: admkrk on April 22, 2005, 10:18:03 PM

Title: could this be from patchers?
Post by: admkrk on April 22, 2005, 10:18:03 PM

on a couple tapes from last weekend, i found a bit of noise at the begining of a couple sets. nothing realy major, but anoying just the same. it's the sound of a shorting cable to my ears? could this be caused from pluging in patchers? or should i look somewere else for the problem? 

just to clarify a little:   i never had this noise before. first time someone patched from me. also first time running this particular rig: nak 301>ua-5>d8 and new cables(no continuity problems). the noise coinsides w/ when patch might have been pluged in? patched out of ua-5 & d8.   

i have no problems w/ patchers, but would it be better to say:" if you got here before the music started... "   or should i look at other issues?

Title: Re: could this be from patchers?
Post by: balou2 on April 22, 2005, 10:37:59 PM

The noise could be any number of problems.

With regards to the patcher issue, I NEVER let anyone patch after the set starts.  Most folks who patch regularly know to get there early and wait, or turn their gear over to the taper for him/her to deal with once the rig is set up.
Mike

Title: Re: could this be from patchers?
Post by: F.O.Bean on April 22, 2005, 11:33:25 PM

sounds like a d-8 problem to me,YMMV

Title: Re: could this be from patchers?
Post by: Tim on April 23, 2005, 12:29:20 AM

never had any problems with patchers introducing noise... ymmv I suppose

Title: Re: could this be from patchers?
Post by: balou2 on April 23, 2005, 07:14:45 AM

Quote from: Bean on April 22, 2005, 11:33:25 PM

sounds like a d-8 problem to me,YMMV

...yet another acronym I am unfamiliar with.  What the hell is YMMV?

Title: Re: could this be from patchers?
Post by: drewloo on April 23, 2005, 08:40:11 AM

Quote from: balou2 on April 23, 2005, 07:14:45 AM

Quote from: Bean on April 22, 2005, 11:33:25 PM

sounds like a d-8 problem to me,YMMV

...yet another acronym I am unfamiliar with.  What the hell is YMMV?

your mileage may vary

Title: Re: could this be from patchers?
Post by: Rleeee on April 23, 2005, 01:35:54 PM

As a patcher I would never ask for a line out once the music starts, especially with smaller decks. I would wait untill a set break, or just be, shit out of luck.

Title: Re: could this be from patchers?
Post by: itook2much on April 23, 2005, 03:15:27 PM

Quote from: O-Canis on April 23, 2005, 02:36:59 PM

Quote from: Tim on April 23, 2005, 12:29:20 AM

never had any problems with patchers introducing noise... ymmv I suppose

Except the kind that sounds like, "Yo, brah, can a brotha get a patch?" real loud ;D

Ha ha ;D

Title: Re: could this be from patchers?
Post by: admkrk on April 23, 2005, 10:20:54 PM

thanks for the input guys.   think i narrowed it down abit though and it's not in the recording. seems to be issues w/ my da-30 and the rr/ff buttons(or should i say transport?).  after transfering one show on a tape and cueing it back up for the next i heard the same noise and it wasn't there the first time through. guess i'll start w/ a good head cleaning and see if that helps.