Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: ethan on May 20, 2005, 01:30:05 PM

Title: Hey 744 owners have you thought about trying this?
Post by: ethan on May 20, 2005, 01:30:05 PM

I was wondering whether using a cross over cable and recording bass and mid/highs on separate channels might be practical. This way you could mix the two without having to use a HPF at record time.

Seems like some of the passive crossover cables used in car audio might do the trick.

Just a thought.

-e

Title: Re: Hey 744 owners have you thought about trying this?
Post by: Karl on May 20, 2005, 03:38:58 PM

Why not just record with no bass roll off, then eq'ing the bass in post?

Title: Re: Hey 744 owners have you thought about trying this?
Post by: ethan on May 20, 2005, 03:43:12 PM

Because most of your energy is in the low end so your not getting good resolution at mid/high frequencies. This way you can capture both near full scale and mix down.

-e