Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: sweatboard on May 23, 2005, 11:49:07 PM

Title: ua-5 with jb3
Post by: sweatboard on May 23, 2005, 11:49:07 PM

Do I need to run my warm mod ua-5 into my computer for the firmware updates, or would it be ok to leave it as is.  Also, Im still confused about the track seperation on the jb3 during long recordings, if I have the latest firm ware does it dissable the track seperations or do I need to do it manually on the settings of my jb3?  Thanks for all your help.  I just got my mics (at853rx's) in the mail today and I want to make my first tape tommorow night so I want to be ready.  Any other words of advice would be appreciated.  Thanks again,

Brian

Title: Re: ua-5 with jb3
Post by: leehookem on May 24, 2005, 12:30:24 AM

JB3 will record 3 hours at a time.  You will have to manually hit "new recording" or just track forward to start a new recording.

you don't need to update firmware for the UA5

Title: Re: ua-5 with jb3
Post by: sweatboard on May 24, 2005, 12:52:51 AM

Ok, I guess I ment, do I need to get the drivers for the ua-5?  Thank You Homer J.

Title: Re: ua-5 with jb3
Post by: dklein on May 24, 2005, 01:36:16 AM

You don't need the drivers for the UA-5 unless you're using it with a pc/laptop for recording/playback.  They don't come into play when using it standalone to feed a JB3.