Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: jeromejello on June 02, 2005, 04:53:04 PM
-
i was looking for a frequency graph and that crazy circular thing for my mic caps... the AT web site has the 853 card's but not the hypers or omnis... anyone know where i can get the info for all three (or four if there is the sub cards)... .pdf or scans?
thanks
-
i was looking for a frequency graph and that crazy circular thing for my mic caps... the AT web site has the 853 card's but not the hypers or omnis... anyone know where i can get the info for all three (or four if there is the sub cards)... .pdf or scans?
thanks
I have the cards and hypers, I could never find the specs on the hypers anywhere. Hopefully someone has them, my google searches turned up nothing.
-
i was looking for a frequency graph and that crazy circular thing for my mic caps... the AT web site has the 853 card's but not the hypers or omnis... anyone know where i can get the info for all three (or four if there is the sub cards)... .pdf or scans?
thanks
I have the cards and hypers, I could never find the specs on the hypers anywhere. Hopefully someone has them, my google searches turned up nothing.
i couldnt get anything on google either >:( ... i was kinda hoping that my new caps would have come with the info card, but alas they did not...
-
pdf attached.
marc
-
pdf attached.
marc
you rock dude... +t
-
pdf attached.
marc
holy wow dude.... thank you!
-
no sweat dudes! anything to promote these damn fine mics is always a pleasure.
marc
-
pdf attached.
marc
+t marc! :D
-
Someone educate me. While looking at the polar patterns, it appears that the only difference between the card and hyper capsule is the addition of the rear lobe on the hyper. However, I do realize that the pick-up angle is 20 degrees 'tighter' on the hyper capsule. I understand that the hyper can be used at greater distances from the stage to achieve good results. The question I have, is: Is there a chart that compares the distances that each polar pattern reaches rather than the shape of the 'lobe'?
-
Someone educate me. While looking at the polar patterns, it appears that the only difference between the card and hyper capsule is the addition of the rear lobe on the hyper. However, I do realize that the pick-up angle is 20 degrees 'tighter' on the hyper capsule. I understand that the hyper can be used at greater distances from the stage to achieve good results. The question I have, is: Is there a chart that compares the distances that each polar pattern reaches rather than the shape of the 'lobe'?
if you look at the first page you will see there is a choir mock up where there are distances used. not exactly what you are looking for, but maybe will do the trick...hypers will give the same s/n ratio at 20meters that omnis do at 10meters.
Can this .pdf be archived please
-
Someone educate me. While looking at the polar patterns, it appears that the only difference between the card and hyper capsule is the addition of the rear lobe on the hyper. However, I do realize that the pick-up angle is 20 degrees 'tighter' on the hyper capsule. I understand that the hyper can be used at greater distances from the stage to achieve good results. The question I have, is: Is there a chart that compares the distances that each polar pattern reaches rather than the shape of the 'lobe'?
This is on the DPA site, maybe it's what you're looking for:
(http://www.dpamicrophones.com/Images/DM00578.GIF)
-
Can this .pdf be archived please
Done (http://taperssection.com/index.php?topic=43549.0).
-
Can this .pdf be archived please
Done (http://taperssection.com/index.php?topic=43549.0).
thanks mr moderator ;)