Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: maCalex on June 11, 2005, 11:42:22 AM

Title: Some setting-questions on a sonosax m2!
Post by: maCalex on June 11, 2005, 11:42:22 AM

hi there !

i will use my new sonosax m2 tomorrow nite for the first time at a loud rock-show. its connected to a sony d100 with dpa mics (4061).
as i've never used that phantomunit before i wonder if you guys have some ideas which "sonosax- and dat rec-level settings" would be working out fine ? i will be standing dead-center about 60 feet away from pa.

thanx so much for your help


mac

Title: Re: Some setting-questions on a sonosax m2!
Post by: Nick Graham on June 13, 2005, 11:53:01 AM

I'd set the levels on the sax at about 10 o'clock (on low gain), and crank the D100 as high as you can without clipping.

Obviously YMMV depending on the actual volume of the show, but that'd be a good starting point.