I've been told DC jack is 2.1 x 5.5 (same as mini-me), but 4 different 2.1mm jacks don't fit the unit. odd.
has anyone run this on DC yet? if so, what dimensions are your connectors? I feel like I coulud force it, but it's not going. Don't want to break it, but want to use the gear. almost looks like the center positive pin is too fat.
nevermind, apparently it's 2.5 x 5.5...
so what does this little box sound like? clean, colored, warm, round, what?
still haven't heard it but it seems very intriguing...
Quote from: Tim on July 27, 2005, 06:53:56 PM
so what does this little box sound like? clean, colored, warm, round, what?
still haven't heard it but it seems very intriguing...
Talk to Scott Brown...
I didn't want to badger him with PM's :)
i love it. very clean. very transparent. very detailed.
it's a small companybased out of small shop in NYC. but they make some sweet products. a lot of studio guys are choosing mytek gear over the "big boys" like apogee, lavry, etc. and this is over things like the trak2 and psx100, not the minime...
What is everyone running, the Stereo 96 or the Stereo 192? Any difference between the two (besides sample rates)?
http://mytekdigital.com/products/stereo192adc.htm
The main differences between Stereo192ADC and Stereo96ADC are:
- up to 192k operation (for playback at 192k check Stereo96DAC or 8X192 ADDA)
- ability to work on Battery Power
- ultra hi-end audiophile grade front end featuring large solid state capacitors (instead of electrolytics)
- Trimpots/knob switchable on front panel
- No 16/20 bit output (only 24)
like krebsy said, 192 is the only dc powered one
it lasts over 3 hours on the lithium from walmart.
Anyone run an M148 in front of one?
david seymour is with mytek now, i would talk with him, nice young guy. ;D
David Seymour
Mytek Digital
330-354-1576
www.mytekdigital.com
Quote from: bkirby on July 28, 2005, 10:54:24 AM
Anyone run an M148 in front of one?
i might be soon.
;)
Quote from: Nick Graham on July 29, 2005, 04:12:56 PM
Quote from: BigRay on July 29, 2005, 05:44:10 AM
Quote from: bkirby on July 28, 2005, 10:54:24 AM
Anyone run an M148 in front of one?
i might be soon.
;)
Jeeeeeeezus...
;)
hater!
:)
A couple of bands here asked me to tape em regularly, and i wanna do right by em, you know..
8)
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
Quote from: Nick Graham on July 29, 2005, 05:00:40 PM
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
LMAO! :D ;D
Funny Guy. +T in 12.
Quote from: BigRay on July 29, 2005, 05:02:30 PM
Quote from: Nick Graham on July 29, 2005, 05:00:40 PM
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
LMAO! :D ;D
Funny Guy. +T in 12.
You know I love ya...
;)
Quote from: Nick Graham on July 29, 2005, 05:04:07 PM
Quote from: BigRay on July 29, 2005, 05:02:30 PM
Quote from: Nick Graham on July 29, 2005, 05:00:40 PM
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
LMAO! :D ;D
Funny Guy. +T in 12.
You know I love ya...
;)
:)
you need to save up some dough and get some more schoeps :D
Quote from: Nick Graham on July 29, 2005, 05:00:40 PM
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
Aah, he's just overcompensating for not having a Schoeps/Lemosax rig, right Nick? ;D >:D That's a pretty exclusive team.
- Jason
Quote from: Jason Reiser on July 29, 2005, 11:24:29 PM
Quote from: Nick Graham on July 29, 2005, 05:00:40 PM
MG 200/210/at 4050/DPA 4061(soon)>MiAGi-II Silver Cables/Canare Star Quads >m148/v2/mma6000(soon)>jb3x2/722
Soon to be:
MG 200/210/at 4050/DPA 4061/Neumann U87/Schoeps MK4/AKG 480/DPA4022/Neumann KM140/Neumann KM184>MiAGi-II Silver Cables/Canare Star Quads>m148/v2/mma6000/v3>m248/mytek192/DMIC 20/SXM2>jb3x2/722/R1/R4/Micro Tracker/DAP1/D8/D7/Vx Pocket 440
Aah, he's just overcompensating for not having a Schoeps/Lemosax rig, right Nick? ;D >:D That's a pretty exclusive team.
- Jason
actually...i was considering one to throw in front of the dpas.i get em damn cheap...
Quote from: Sixto Lezcano on August 02, 2005, 01:45:51 PM
big ray, why even bother with the 722 if you are going to wind up running a preamp and a adc in front of it? $2400 for a recorder? seems like overkill to me, you could get a r4 or something for quite a bit less and run 4 mics if size isn't an issue. use that extra scratch to buy more shit ;)
I was talking with my tounge in my cheek. ;)
I think I have a perfect setup, the only thing I would possibly think about is 4 channel mixer to run my mics into it.
Quote from: BigRay on August 02, 2005, 02:22:02 PM
Quote from: Sixto Lezcano on August 02, 2005, 01:45:51 PM
big ray, why even bother with the 722 if you are going to wind up running a preamp and a adc in front of it? $2400 for a recorder? seems like overkill to me, you could get a r4 or something for quite a bit less and run 4 mics if size isn't an issue. use that extra scratch to buy more shit ;)
I was talking with my tounge in my cheek. ;)
I think I have a perfect setup, the only thing I would possibly think about is 4 channel mixer to run my mics into it.
Ray, if it were perfect you'd have some Neumanns in front. ;D
We're waiting for you over here ~~> http://taperssection.com/index.php?topic=20951.0
Quote from: DarkStarJedi on August 02, 2005, 02:37:00 PM
Ray, if it were perfect you'd have some Neumanns in front. ;D
he wanted the
true Neumann sound so he got the Gefells :P
Quote from: DarkStarJedi on August 02, 2005, 02:37:00 PM
Quote from: BigRay on August 02, 2005, 02:22:02 PM
Quote from: Sixto Lezcano on August 02, 2005, 01:45:51 PM
big ray, why even bother with the 722 if you are going to wind up running a preamp and a adc in front of it? $2400 for a recorder? seems like overkill to me, you could get a r4 or something for quite a bit less and run 4 mics if size isn't an issue. use that extra scratch to buy more shit ;)
I was talking with my tounge in my cheek. ;)
I think I have a perfect setup, the only thing I would possibly think about is 4 channel mixer to run my mics into it.
Ray, if it were perfect you'd have some Neumanns in front. ;D
We're waiting for you over here ~~> http://taperssection.com/index.php?topic=20951.0
ill be on the team as soon as get some u89s. ;)
Quote from: DarkStarJedi on August 02, 2005, 02:37:00 PM
We're waiting for you over here ~~> http://taperssection.com/index.php?topic=20951.0
Hey! I started that thread....
Quote from: Nick Graham on August 02, 2005, 03:40:33 PM
Quote from: DarkStarJedi on August 02, 2005, 02:37:00 PM
We're waiting for you over here ~~> http://taperssection.com/index.php?topic=20951.0
Hey! I started that thread....
you have neumanns too Nick?
He did until he sold them to me!! :D They are still in good hands. In fact, they recently gained a new friend.
Quote from: muj on July 29, 2005, 05:21:00 AM
david seymour is with mytek now, i would talk with him, nice young guy. ;D
David Seymour
Mytek Digital
330-354-1576
www.mytekdigital.com
Thanks for the props! I really hope that I can get to know you all better. I do mostly studio type recording but recording live shows is something that I could really learn from and get into. Thanks again!
Quote from: nic on August 02, 2005, 02:40:40 PM
Quote from: DarkStarJedi on August 02, 2005, 02:37:00 PM
Ray, if it were perfect you'd have some Neumanns in front. ;D
he wanted the true Neumann sound so he got the Gefells :P
+T :bigsmile: