Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: Colin Liston on August 01, 2005, 09:15:37 AM

Title: AD1000 > D8 clipping
Post by: Colin Liston on August 01, 2005, 09:15:37 AM

I was running Gefell 210's > AD1000 >JB3/D8 last night for Blues Traveler.  My D8 "over" lights were coming on, but the Apogee wasn't even blinking yellow, and I never saw a red light come on.  I haven't listened to the whole set but from what I"ve heard I didn't hear any clipping.

Has anyone had or seen this problem before?  Should I be worried about the D8 clipping?

thanks
colin

Title: Re: AD1000 > D8 clipping
Post by: Tim on August 01, 2005, 03:59:33 PM

the d8 is just writing 1's and 0's from the ad1k... so long as the ad1k is not clipping the tape should be fine

Title: Re: AD1000 > D8 clipping
Post by: Colin Liston on August 01, 2005, 04:15:34 PM

Excellent!  Thanks, that is what I was hoping to hear.

colin

Title: Re: AD1000 > D8 clipping
Post by: Kyle on August 01, 2005, 04:19:14 PM

My D8 did the same thing. Interestingly enough, when I used to run the SBM1 - I had the same problem. The over lights on the D8 would come on before the over lights on the SBM1. I always went by the AD1K or the SBM1 - never had a problem.