I have a few different mics, and would like to try eventually try using them together at gigs.
I guess Im asking if it would be possible to go
mic pair 1>preamp>-------------------------------/>
sbd---------->(line in) ----------------------------- > mixer> 722
or another mic pair-->(preamp)----------------\>
is such a thing possible?? does anyone here do that?? Just askin cuz of the upcoming brass band gigs, and after seeing someone run a multi mic setup on a tv program here its got me curious.
wendt x4 - for sale here --> http://taperssection.com/index.php?topic=32165.0
sd 442
Quote from: fozzy on August 01, 2005, 05:54:13 PM
wendt x4 - for sale here --> http://taperssection.com/index.php?topic=32165.0
sd 442
is that possible though fozzy??running multiple sources into the mixer then out to the 722?
thanks man, you have been helping me out a great deal.
yea, 4 in 2 out
ie: 1,2(IN) would be the mgs and 3,4(IN) would be the ATs or a SBD then you assign the 1,3 to the left out and the 2,4 to the right output.
i've only used wayne's x4 but i think all the eng 4channel mixers you can assign which out put they send to, L,R, or both. could also run 3 mics stereo pair in coincident pattern(L,R) and a omni in the middle(both)
another one
http://www.cevl.com/4mix.html
Quote from: fozzy on August 01, 2005, 06:00:45 PM
yea, 4 in 2 out
ie: 1,2(IN) would be the mgs and 3,4(IN) would be the ATs or a SBD then you assign the 1,3 to the left out and the 2,4 to the right output.
i've only used wayne's x4 but i think all the eng 4channel mixers you can assign which out put they send to, L,R, or both. could also run 3 mics stereo pair in coincident pattern(L,R) and a omni in the middle(both)
another one
http://www.cevl.com/4mix.html
that is good stuff Fozzy. Thanks so much. BTW, keep an eye on your paypal. ;)
Teddy
+T