Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: flagg6805 on August 06, 2005, 04:02:29 PM
-
Hi All!
I own a set of Microphone Madness mics and after looking around could not find a set of shock mounts that would fit the size of my microphones (at least not any at a price that I wanted to pay.) So, I searched around the internet for DIY shock mounts and found something similar to the ones I eventually made (I since then cannot find the guy's site to give him credit for the original design, but I will as soon as I find out.) For those of you who are DIYers and want to make some shock mounts, I've decided to post directions on how to make a set of shock mounts for stealth-sized mics. Maybe I'll see another set of these at the next show I go to!
EDIT: I think this post was WAY too long, so I cut out the directions. If you're interested in making these, just drop me an email and I'll send you the directions.
-
+t for DIY stuff..
-
MANY thanks for the post and pics .. i'm attempting my DIY T-mount and shocks tomorrow after a trip to home depot .. thanks for more ideas! ...
tyler
-
tyler- let me know if you want my instructions too, might help explain the pics a little. Also, let us know about how you make the t-mount. For my mount, I used a 6" flat corner iron which gives me a perfect 90 deg. angle, but I don't think the spacing is correct for NOS or DIN...
-
yeah I e-mailed you to get the directisons, I just e-mailed the address in your profile.. did you not get it? .. I'd appreciate it, thanks!
LJsurfer2002@yahoo.com
yeah for the T mount, not sure what i'm going to do..
what is a 6" flat corner iron? .. just a right angle of metal? are there eye holes in the edges of the L shape that the nuts can go through for the shockmounts? .. i'm sure i'll make something .. whether or not it works is another story! ;)