Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: johnnyb on August 13, 2005, 06:39:46 PM

Title: MBHO 603a Mic qustion
Post by: johnnyb on August 13, 2005, 06:39:46 PM

Hi could someone shed any comments on these mics, this mic also comes with a preamp so would that mean i dont need a battery box?  Im using a Sony Dat. the mics would be used for large halls

heres a link the the mics, ty for takin the time to read                    http://www.cascademedia.net/products.asp?catid=120&prodid=695

Title: Re: MBHO 603a Mic qustion
Post by: Tim on August 13, 2005, 07:01:22 PM

the preamp is just the mic body, you would still need 48v phantom power for these mics.

You can get a preamp like the Sound Devices MP-2, or a Lunatec V2 to power the mics and provide you with gain and then run line into the DAT

or you could just buy a 48v phantpm power box like the Denecke PS2 to power the mics and then run mic in or line in to the DAT. To do this succesfully you may need to get a pair of line transformers to provide you with enough gain to run line in - check the archive for suggested models of line transformers. this is your cheapest solution though..

Title: Re: MBHO 603a Mic qustion
Post by: johnnyb on August 13, 2005, 07:16:09 PM

Thanks Tim, ive been reading alot of pros and cons on these mics and im so gratful for these forums, thanks again

Title: Re: MBHO 603a Mic qustion
Post by: Tim on August 14, 2005, 06:08:00 PM

no problem, glad to help