i just got some attenuators for my setup, i know they pass phantom power, so should i run them going into my ps/2 or out of it, just curious, im sure both work but im looking for the most reliable way to run them. i also have a pair of 3' x-stream cables, would it be smart to run it this way at4051a>kiwi xlr>ps/2>xstream>attenuator>ad20
would this be okay, ive never had experience with phantom power and attenuators before i bought my new mics, they sound good and the attenuation should be perfect at -10db, thanks for you suggestions.
Out of it - you attenuate for the sake of your pre, not your ps ;D
Enjoy
A
Yeah, that setup you listed is right on.
i know that, just want to know where to place the attenuator
Somewhere in between the PS-2 and the AD-20.
doesnt matter if those extra cables are in there inbetween the ps/2 and ad20?
Not one bit!
I mean, if you're not stealthing, then just go PS2>attens>AD-20 for the good ol' Brick-o'-Denecke and for the sake of shortening the signal path.
Quote from: zhianosatch on July 25, 2003, 08:07:36 PM
I mean, if you're not stealthing, then just go PS2>attens>AD-20 for the good ol' Brick-o'-Denecke and for the sake of shortening the signal path.
Definately seen that one in action before! It looks intimidating as hell.
OOO-raah!