Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: Rick on August 25, 2005, 08:43:52 PM

Title: More 722 Low Cut Samples
Post by: Rick on August 25, 2005, 08:43:52 PM

http://bt.etree.org/details.php?id=17614

Source:   DPA 4022 > Sound Devices (24/96)
Mic Info: ORTF ~7.5 up Outside

01: Normal
02: Low Cut 40 Hz, 12 db/oct
03: Low Cut 80 Hz, 12 db/oct
04: Low Cut 40 Hz, 18 db/oct
05: Low Cut 80 Hz, 18 db/oct
06: Low Cut 160 Hz, 12 db/oct
06: Low Cut 160 Hz, 18 db/oct

All Tracks about 30 seconds long. Levels were not adjusted.


Low Cut 80 Hz, 12 db/oct with the DPAs is where its at! At least I think so :) Please leave your thoughts!

Title: Re: More 722 Low Cut Samples
Post by: dklein on August 28, 2005, 09:47:35 AM

no seeders

Title: Re: More 722 Low Cut Samples
Post by: Rick on August 28, 2005, 10:51:21 AM

Quote from: dklein on August 28, 2005, 09:47:35 AM

no seeders

I'm back on

Title: Re: More 722 Low Cut Samples
Post by: dklein on August 28, 2005, 01:05:21 PM

hey Rick - got it now, thanks.  Same as last time, my ears and playback system like the 80 Hz, 12dB/octave.

Any chance that #6 is actually the 160/18 and #7 is the 160/12.  Sounds that way to me (hard to tell because the info file calls both of them track 6).

Title: Re: More 722 Low Cut Samples
Post by: Rick on August 28, 2005, 02:51:06 PM

Quote from: dklein on August 28, 2005, 01:05:21 PM

Any chance that #6 is actually the 160/18 and #7 is the 160/12.  Sounds that way to me (hard to tell because the info file calls both of them track 6).

opps!... I'm almost certain I did 12db first.

06: Low Cut 160 Hz, 12 db/oct
07: Low Cut 160 Hz, 18 db/oct

160hz was just to much