Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: Kurt8 on October 07, 2005, 10:04:53 AM
-
Got mine yesterday. Firmware seems to be 1.02 although 1.00 was displayed while charging. I charged it for 14 hours straight but never got "Charging Complete" in the display as the manual states. Anyone else have that problem? My L/M/H switch sems to be correct without the update.
Kurt
-
Got mine yesterday. Firmware seems to be 1.02 although 1.00 was displayed while charging. I charged it for 14 hours straight but never got "Charging Complete" in the display as the manual states. Anyone else have that problem? My L/M/H switch sems to be correct without the update.
How did you test the L/M/H switch?
The charging is in progress here. (got it in today)
Got the `flickering` charging symbol once, got a 'full battery' symbol twice. Will continue charging until full 6 hours are done.
-
I simply put the switch on M, plugged a mic into the 1/8 jack and made a recording. I'm assuming that if the M setting is working with a mic then the L setting will work with a line level signal. It seems that some people reported that the M and L were switched on some units.
Kurt
-
Mine has never given me a "charging complete"
it does stay backlite the whole time plugged in.
I tried turning it "off" the backlite goes off and then comes back on, but the battery icon starts "fillin up" again.
I have now done this 3 or 4 times with same "refill" happening.
still no messgae that charging is done. Hmnn ??? :-\
-
I get no messagesaying charge complete, but thebattery symbols stops filling up
to me that symbols that it's charged