I'm running adk a51-tl>mini-me>c1-mv picturebook. Looking for power to run the mini-me and my mics also wondering what software people are using. right now i have soundforge 6, running on xp home. I have heard that xp home is not the way to go.
Lots of help needed and greatly appreciated
Best bet for powering your MMe is an SLA battery. It's awfully easy to make one yourself - search the archives to find out how. FYI, your MMe will power the mics.
can't find anywhere in here how to build the SLA battery
use either win xp pro or win 2k pro, but stay away from xp home and win me.
Quote from: hzgone on August 06, 2003, 05:20:30 PMcan't find anywhere in here how to build the SLA battery
Ahem. :P
http://www.taperssection.com/yabbse/index.php?board=14;action=display;threadid=2462 (http://www.taperssection.com/yabbse/index.php?board=14;action=display;threadid=2462)
Thanks must have looked past it. I have another question, I must not have the right adaptor for the shure a27m, i also have the AKG KM 235 which i don't see how i can connect my mics.
d0 you have shockTmounts?
i got it figured out i'm such and idiot i forgot to take out the adaptor in the shock mount
Thanks for all your help
the shure a27m uses a 5/8 inch thread, you might need an adaptor depending if you shockmounts use a 3/8 or 1/4 inch threads, ive had these problems wiith the sabras and the bogen t-bars, micsupply has any adaptor you could need for mounting shockmounts to t-bars, t-bars to stands, etc., hope this helps
Quote from: cpclark on August 07, 2003, 05:45:06 PM
the shure a27m uses a 5/8 inch thread, you might need an adaptor depending if you shockmounts use a 3/8 or 1/4 inch threads, ive had these problems wiith the sabras and the bogen t-bars, micsupply has any adaptor you could need for mounting shockmounts to t-bars, t-bars to stands, etc., hope this helps
+T chris... ;D