Text only | Text with Images

Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: beanstalk on October 31, 2005, 02:37:33 PM

Title: Setup for one shock mount with 2 microphones Question (not active)
Post by: beanstalk on October 31, 2005, 02:37:33 PM
I saw a couple of months ago a setup for 2 mics with one shock mount (not active) and was wondering where it is or if some just had some info for me to set it up? I did a search and came up with nothing. I think they were 184. Any help would be great. Thanks all.  ;D
Title: Re: Setup for one shock mount with 2 microphones Question (not active)
Post by: bhtoque on October 31, 2005, 02:59:32 PM
I think Rob C started the post you are talking about. All you have to do is get a male threaded adapter and screw the two mic clips together, then put them in the mount. He was probably using an a-20, but it will also work with other shocks.

JAson
Title: Re: Setup for one shock mount with 2 microphones Question (not active)
Post by: bhtoque on November 01, 2005, 01:32:57 AM
Quote from: gotfob on October 31, 2005, 09:05:50 PM
here's the thread I started-->  http://taperssection.com/index.php?topic=28738.0


+T for pulling up the thread.

JAson
Title: Re: Setup for one shock mount with 2 microphones Question (not active)
Post by: beanstalk on November 01, 2005, 07:44:31 AM
Thanks
Title: Re: Setup for one shock mount with 2 microphones Question (not active)
Post by: chucky on November 01, 2005, 08:39:53 AM
I also run my 184s using only 1 shockmount.
The shockmount is kinda like a clamp so I dont need
the threaded rod to keep em straight. I just clamp the stock
mounts in there and booom DINA  8)
I just use a thread adaptor to get the  extra 3 cm for DIN.

Also, you might have to run RA out of the mics to get 90.
Title: Re: Setup for one shock mount with 2 microphones Question (not active)
Post by: bhtoque on November 01, 2005, 03:39:24 PM
yeah, to get this to work, you definately need right angle cables.

JAson
Title: Re: Setup for one shock mount with 2 microphones Question (not active)
Post by: Chuck on November 01, 2005, 05:15:29 PM
Man, I'd like to make this work with my 480's...
Title: Re: Setup for one shock mount with 2 microphones Question (not active)
Post by: fozzy on November 01, 2005, 05:20:41 PM
Quote from: Chuck on November 01, 2005, 05:15:29 PM
Man, I'd like to make this work with my 480's...

I don't think this would work for the 480s because they are about twice the length of the 184s
Text only | Text with Images