Taperssection.com
Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: gewwang on November 15, 2005, 12:14:16 PM
-
My WRT54G was working fine before I left the house last Sunday. I got home last night and the lights don't come on. Rather than deal with customer service, I think I'm just going to go buy a new one since best buy is running a rebate right now on the linksys models. What's the difference between
Linksys - 802.11g Wireless Router WRT54G
Up to 54 Mbps transfer rates with Wireless-G (54g); 2.4GHz wireless frequency (802.11g- and 802.11b-compliant); cable/DSL Internet sharing
and
Linksys - SpeedBooster 802.11g Wireless Router WRT54GS
Increased performance and efficiency; 802.11b/g-compliant; Wi-Fi Protected Access (WPA)
Is speedbooster really worth the extra $20?
-
Assuming the hype is true and SpeedBooster actually performs as marketed, it's only worth switching to the SpeedBooster model if:
<1> all your other devices are also equiped with SpeedBooster adapters
<2> you're using wireless to transmit large data sets across an internal network
And definitely NOT worth it if
<3> you're using your wireless router only for distributing internet access; SpeedBooster won't help b/c most broadband connections are far slower than the standard wireless-G speeds, anyway
-
The WRT54G really is the greatest consumer wireless router out there. In addition to the great prices you can find them for, there are all sort of upgraded and improved firmwares for it that can help to increase the performance of them.
The Speedbooster only works if you have Speedbooster cards in your computers. It does NOT speed up existing connections.
I would tell you to go with the 54G and install a new firmware in it. Try http://www.sveasoft.com/ (http://www.sveasoft.com/) They have a couple of different firmware packages for the router. One thing that has helped me quite a bit with my network is the ability to increase the antenna gain as it is limited by the FCC out of the box. By increasing it my range has greatly inmproved as well as fewer dropped packets.
-
Interesting. I see their firmware downloads are only available for a $20/year subscription fee. Is it really worth it for a home network? I don't really have any complaints about my 54TG, but I am curious to see what improvements could be made. I assume you signed up for their subscription?
Dirk
-
Interesting. I see their firmware downloads are only available for a $20/year subscription fee. Is it really worth it for a home network? I don't really have any complaints about my 54TG, but I am curious to see what improvements could be made. I assume you signed up for their subscription?
Looks like they release older versions publicly:
http://www.sveasoft.com/content/view/3/1/
I may give Alchemy a go and try to set up a VPN so I can access my network more easily remotely.
-
Interesting. I see their firmware downloads are only available for a $20/year subscription fee. Is it really worth it for a home network? I don't really have any complaints about my 54TG, but I am curious to see what improvements could be made. I assume you signed up for their subscription?
Dirk
I do run one of their free firmwares. Not in front of my router right now but I use their Satori (sp?) firmware. I'll check later on its version number. If anyone wants it I can email it to you. It is one of the free versions. One of the biggest benefits I found was the ability to adjust the broadcast signal of the router itself. My range has not doubled or anything but signal strength has significanly increased around my house. Also it has more setting for running a VPN which is what I do at home.