Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: whatboutbob on December 06, 2005, 07:33:13 PM

Title: sp-cmc-10 based on which AT?
Post by: whatboutbob on December 06, 2005, 07:33:13 PM
hey folks,

subject pretty much says it all...which AT mics are the SP-CMC-10's based on?

Thanks in advance.
Title: Re: sp-cmc-10 based on which AT?
Post by: M on December 07, 2005, 12:51:32 AM
at899
Title: Re: sp-cmc-10 based on which AT?
Post by: cybermansrev on December 07, 2005, 08:50:39 AM
at899
The AT 899 is certainly the capsule in the Sound Pro's SP-BMC-10 which is Omni.

...which AT mics are the SP-CMC-10's based on?
If you really mean the SP-CMC-10 as stated above this is no longer on the SP website, but CMC is the ref for their Cardioid I think from memory the capsule in them was an AT943 with a Hyper pickup, possibly using an adaptor and the 853 cap on 943 body.
Title: Re: sp-cmc-10 based on which AT?
Post by: whatboutbob on December 08, 2005, 06:09:00 AM
thanks guys.

just to confirm, I am asking about the sp-cmc-10's.

The only reference I can find to the mics they're based on is here: http://www.minidisco.com/sp-cmc10.html

...and I'm not sure i'd take their word for it.

i'm sure i've seen someone on here with a tag-line referring to them as at933's.

they do have hyper-caps.

perhaps they could be 933 bodies with the 853 caps?

anyone?
Title: Re: sp-cmc-10 based on which AT?
Post by: M on December 08, 2005, 07:47:37 AM
Sorry about that.  I thought that was a typo on your part because I didn't see any sp-cmc-10's on the site.

My bad.
Title: Re: sp-cmc-10 based on which AT?
Post by: Humbug on December 08, 2005, 10:48:01 AM
They're wrongly described on minidisco's site. They are SP-CMC-10s, but the capsure is ES943. AT853s are quite a lot larger.

Humbug
Title: Re: sp-cmc-10 based on which AT?
Post by: Humbug on December 08, 2005, 10:51:45 AM
Atually no, scratch that, CMC8s are the cardioids. Guess thats an old page from minidisco?
Title: Re: sp-cmc-10 based on which AT?
Post by: Weazel on December 08, 2005, 02:08:57 PM
jeps that are cmc8 mics with hyper capsules.
Title: Re: sp-cmc-10 based on which AT?
Post by: PG on December 08, 2005, 02:55:00 PM
I think

SP-CMC-2= AT831
SP-CMC-4= AT853 *switchable cap
SP-CMC-6= Omni -AT943 *switchable cap
SP-CMC-8= Cardiod -AT943 *switchable cap
SP-CMC-10= Hypercardiod -AT943 *switchable cap
Title: Re: sp-cmc-10 based on which AT?
Post by: setboy on December 10, 2005, 02:11:36 PM

SP-CMC-10= Hypercardiod -AT943 *switchable cap




this is it
Title: Re: sp-cmc-10 based on which AT?
Post by: whatboutbob on December 12, 2005, 10:15:30 AM
thanks mate.