Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: it-goes-to-eleven on January 14, 2006, 02:52:33 PM

Title: V3 Soundboard... Levels question
Post by: it-goes-to-eleven on January 14, 2006, 02:52:33 PM

A taper buddy wants me to cover a soundboard tonight for Peter Mulvey (solo acoustic guitar).  I'd like to 'set it and forget it' so I can focus on running my mics.

Since the MT isn't very board patch friendly (always have to work out odd levels with the sound guy), I'm thinking of running board RCA's > V3 > MT.  But since I haven't run a board patch into the V3, I was wondering if I should plan on doing anything other than running min gain (10dB) and if I should expect any surprises. Would this be too hot?

Title: Re: V3 Soundboard... Levels question
Post by: F.O.Bean on January 14, 2006, 02:58:12 PM

only time i ran it i ran xlr>v3 aqnd the level;s were low and i think the gain was cranked to 35 or 40

Title: Re: V3 Soundboard... Levels question
Post by: it-goes-to-eleven on January 14, 2006, 10:58:33 PM

Thanks guys!

I ended up not running my mics. I wanted to get a good board and didn't want to bug people while moving from the sbd area to my seat, etc..  The sweet spot was covered..

I ended up going unbal > 722. Optimal gain was about 18-19dB.  So 10+ on the V3 should have been fine.

Title: Re: V3 Soundboard... Levels question
Post by: Jamos on January 29, 2006, 03:25:57 AM

Any chance you could post the Mulvey show? 

I really dig his tunes...

cheers.
 ;D

Title: Re: V3 Soundboard... Levels question
Post by: it-goes-to-eleven on January 29, 2006, 03:33:32 PM

I would need to know that he is okay with boards being circulated.