Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: Nick Graham on January 22, 2006, 04:10:58 PM

Title: Blumlein Question...
Post by: Nick Graham on January 22, 2006, 04:10:58 PM

This question's being carried over from http://taperssection.com/index.php?topic=19866.msg760058#msg760058, figured more people would see it with it not being buried in an older Schoeps related post.

Anyway, would running Figure 8s in a config like the one below be considered Blumlein? The pic below is cardioids @ X/Y, and isn't Blumlein basically just Figure 8s X/Y? Do they have to be vertically on top of one another?

(http://www.routeflap.net/PICT0141.JPG)

Title: Re: Blumlein Question...
Post by: Craig T on January 22, 2006, 06:00:44 PM

While not ideal, I'm sure it would give you that blumlein sound.  My only concern is that the mics would actually interfere with the rear lobes.  Of course, the rear isn't as critical as the front, so if there is some reason you'd prefer to run the side-by-side (mounting hardware, windscreen, preventing visual obstruction, etc), I'd go for it.  In the right situations, blumlein sounds wonderful.

Title: Re: Blumlein Question...
Post by: muj on January 23, 2006, 07:08:14 AM

the mk8 is kinda funky.... the fig 8 pattern is not a dual diagphram design..but single. I should be able to do some blumlein since i have the CMTS 501.