Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: F0CKER on February 13, 2006, 06:50:21 PM

Title: 722 Help
Post by: F0CKER on February 13, 2006, 06:50:21 PM

Having trouble out of the gate with my 722.  Giving it a test run at home and I can't get it to record.  I did one test file, no problem it recorded fine.  Stopped that.  I've been trying to get it to run again, with no luck.  Is there a setting I need to reset?  Help is appreciated. 

Title: Re: 722 Help
Post by: it-goes-to-eleven on February 13, 2006, 07:08:59 PM

Weird.. What happens when you hit the rec button?  Nothing?

Power on, hit record and stuff should happen. If not, you'll need to call SD.

Title: Re: 722 Help
Post by: F0CKER on February 13, 2006, 07:10:29 PM

Nothing...I hit record the first time and it recorded fine.  Tried to do it again and I got nothing.....rrrrrrrrr

Title: Re: 722 Help
Post by: F0CKER on February 13, 2006, 07:40:18 PM

must be the record button...when I set it to record at a certain time it works fine...WTF!?!?!  Guess this one is going back to SD..

Title: Re: 722 Help
Post by: mmedley. on February 13, 2006, 07:46:18 PM

That is strange. I'd call SD first. Double check all your settings. What firmware are you using? Can you access the menus? Just can't record? Check all your other switches on the side too. Is it a digi in you tested? Line in? etc....

Edit:

Welcome to Team 722. I promise you won't be disappointed with the unit, the support, etc....all is top notch!

Title: Re: 722 Help
Post by: F0CKER on February 13, 2006, 08:15:05 PM

I reset all the settings to factory...no luck. I have the latest firmware 1.60.  I can do everything else on the unit, just can't record.  Double checked everything...just so random that it would work once, but not again right after that.    So geared up to break it in, and now it looks like I'll have to wait until a replacement is sent.  Form the minimal exposure I had to it I can tell I'm gonna love this thing...just wish I would've gotten a good unit out of the gate....rrrrrrr

Title: Re: 722 Help
Post by: nickgregory on February 14, 2006, 07:43:24 AM

sounds like it could be a lose connection on the button to the board. 

Title: Re: 722 Help
Post by: Mike Sarnovsky on February 14, 2006, 10:21:13 AM

Is phantom power on by default?  I can't remember.  Check that. 

Title: Re: 722 Help
Post by: F0CKER on February 14, 2006, 11:12:08 AM

I checked everything, the unit is definitley faulty...SD is replacing it with a new unit to be delivered in 2 days.  Great customer service.


Thanks for the feedback everyone.... +Ts all around