Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: §†∑∫åµÞ≥¥ on February 24, 2006, 01:37:00 PM

Title: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: §†∑∫åµÞ≥¥ on February 24, 2006, 01:37:00 PM: does anyone else find this to be true? I found this info the YS from awhile back. thanks.

Quote
you can record, but it isnt bit accurate
when the hard disk spins up to write (every 45 seconds or so) there is a light click, audible in areas with white noise or dead air
shows sound good but not an A recording in my book
drew
Title: Re: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: §†∑∫åµÞ≥¥ on February 24, 2006, 01:55:21 PM: eh, I think I answered my own question. the pops and clicks are a result of the optical-in.

I noticed, however, in the other 8 page iRiver thread that people mentioned this device having a "spdif-in". I don't see that anywhere on the unit... was the meant to say optical-in? see quote below. spdif is with a coax/rca style cable generally.

Quote from: Weazel on January 07, 2006, 07:49:24 AM
the only difference bewtween the 1xx and the 3xx is the spif/d in and out on the 1xx and collor display on the 3xx.
rockbox is also now bussy porting to the toshiba gigabeat and the iaudiio x5.
Title: Re: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: Brian Skalinder on February 24, 2006, 01:59:08 PM: Quote from: stejampzy on February 24, 2006, 01:55:21 PM
I noticed, however, in the other 8 page iRiver thread that people mentioned this device having a "spdif-in". I don't see that anywhere on the unit... was the meant to say optical-in?

S/PDIF may be transmitted over coax or optical (and probably other transmission mechanisms).
Title: Re: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: §†∑∫åµÞ≥¥ on February 24, 2006, 02:29:58 PM: here's what the input looks like. seems like purely optical to me... maybe 1/8" too?

(http://www.cnet.com.au/shared/images/products/mp3bg_200x150.jpg)
Title: Re: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: George on February 24, 2006, 02:44:19 PM: Quote from: stejampzy on February 24, 2006, 02:29:58 PM
here's what the input looks like. seems like purely optical to me... maybe 1/8" too?

(http://www.cnet.com.au/shared/images/products/mp3bg_200x150.jpg)

Definitely 1/8"

I imagine the pops and clicks going optical in will be corrected with rockbox once its written to support it. I taped going line in and it sounded fine to me.
Title: Re: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: rsimms3 on February 25, 2006, 03:35:51 PM: Yes, the IRiver issues are only in the IRiver programming. If you use Rockbox to record, no issues. Drawback is that Rockbox does not support SPDIF (optical) in on the IRiver yet.
Title: Re: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: Sanjay on February 25, 2006, 04:21:27 PM: Quote from: rsimms3 on February 25, 2006, 03:35:51 PM
Yes, the IRiver issues are only in the IRiver programming. If you use Rockbox to record, no issues. Drawback is that Rockbox does not support SPDIF (optical) in on the IRiver yet.

they need to get that movin, stat ;D
Title: Re: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: whatboutbob on February 26, 2006, 09:45:02 AM: AFAIK noone's working on it. :(
Title: Re: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: rsimms3 on February 26, 2006, 09:56:57 AM: Quote from: whatboutbob on February 26, 2006, 09:45:02 AM
AFAIK noone's working on it. :(

I don't think anyone is either. It seems the main folks over there are busy with the newer projects, iPod, and don't have as much time for the iRiver specific stuff.
Title: Re: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: Sanjay on February 26, 2006, 02:25:07 PM: oh well in the end it will only save me money...

I was gonna get a T+UA-5 for matrixs.
Title: Re: iRiver IHP-120 / H-120 -- pops and clicks?
Post by: tod3sschu3tze on March 03, 2006, 01:34:29 PM: i tape with the H120 too, of course with line-in. no problems, A recordings possible :)