Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: tthcore on February 25, 2006, 11:24:00 AM
-
Total newbness... I have a mobile pre i use for home recording and such. Could i use that as a pre when i'm taping at a show, i'm getting a MiniDisc reocrder to record? Would that set up work? What kind of battery do i need to power the Pre? Would i still be able to use the phantom power? thanks....
-
From the looks of the rear panel it appears the only way to power this is through the USB port. I don't have any experience with this pre but it appears it may only work when hooked up to a computer. now if you could figure how to power the thing through the usb port with out a computer than it does appear possible to use it. ideally you want a pre with a optical digital out, so you could run digi in on the md, but you can also run line in on the md and the pre in question has both 1/8 inch line out and 1/4 inch line outs. The MD in question has a 1/8 line in and mini optical in on the same port......since it is my md you buying.
I suggest you look at soundprofessional
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-PREAMP
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-CMC-4
This is the set up I started with. It will get your feet wet in the taping scene. If you don't like it everything has a good resale value, especially the mics and pre.
-
From the looks of the rear panel it appears the only way to power this is through the USB port. I don't have any experience with this pre but it appears it may only work when hooked up to a computer. now if you could figure how to power the thing through the usb port with out a computer than it does appear possible to use it. ideally you want a pre with a optical digital out, so you could run digi in on the md, but you can also run line in on the md and the pre in question has both 1/8 inch line out and 1/4 inch line outs. The MD in question has a 1/8 line in and mini optical in on the same port......since it is my md you buying.
I suggest you look at soundprofessional
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-PREAMP
http://www.soundprofessionals.com/cgi-bin/gold/item/SP-CMC-4
This is the set up I started with. It will get your feet wet in the taping scene. If you don't like it everything has a good resale value, especially the mics and pre.
If you're brave enough to crack the case, I'd love to see photos of the insides of this thing! In particular, what is the preamp and phantom power supply.
As far as using standalone, you've got two problems. One is powering it. That is easy, just put +5V on two wires of the USB connector (not sure which though!) The bigger problem is getting it to route analog in (mic) to analog out. I don't know if this could be done, eg., by hotwiring the insides. And, there is no digital output, so that does not look possible.
Anyway, pics if you got them :)
Thanks,
Richard
-
i run an M-Audio FW 410, which has a few more features that the mobile pre, but its the same idea (and it has a FW connection). they will NOT operate as standalone units (must be controlled by computer), which sucks, but when recording with my laptop I take home some very nice recordings. hope this helps.
Total newbness... I have a mobile pre i use for home recording and such. Could i use that as a pre when i'm taping at a show, i'm getting a MiniDisc reocrder to record? Would that set up work? What kind of battery do i need to power the Pre? Would i still be able to use the phantom power? thanks....