Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: Javit on March 15, 2006, 10:06:43 PM
-
Any opinions on either? I'll be using it for both soundboard patching and stealth taping as it will be my first up with a D8, I'm just wondering.
-
sbd use line in, always use line in EXCEPT if you are running your mics straight into your d8
-
Your best bet to avoid overloading/brickwalling the mic-pre is to always use the line inputs no matter if your recording off a board or plugging mics directly into the deck - unless you can't get a strong enough signal from your mics, then switch to the mic-pre input.
dB-
-
line in for sure by me.
-
line in, accidentally did mic in on a sbd patch once, end result was very noisy to say the least