Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: dennisrtyler on March 20, 2006, 07:14:00 PM

Title: Mic Stand>Shure A27M Help Needed
Post by: dennisrtyler on March 20, 2006, 07:14:00 PM

I recently purchased this stand http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7588993059 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7588993059) and the ad states the stand has a 5/8" thread. i figured this would work with my shure stereo bar seeing that it has a 5/8" thread. well, the shure bar arrived today and i go to screw it onto the stand and it doesn't work. what am i doing wrong here? thanks for any help!!!

Title: Re: Mic Stand>Shure A27M Help Needed
Post by: terrapinj on March 20, 2006, 07:19:26 PM

you need an adapter for those dynatran stands. i believe that there is a 5/8" stud, and some of them have a 1/4" threading on top.  check micsupply.com > "Stand fitting w/ 3/8>5/8 adapter" (866) 894-3721

or if that doesn't seem right and you think the stand has the proper threading maybe snap a couple photos of the top of the stand and the shure bar

Title: Re: Mic Stand>Shure A27M Help Needed
Post by: dennisrtyler on March 20, 2006, 07:21:24 PM

thanks terrapin!!!

Title: Re: Mic Stand>Shure A27M Help Needed
Post by: tim in jersey on March 20, 2006, 07:24:10 PM

http://taperssection.com/index.php?topic=60654.0

Title: Re: Mic Stand>Shure A27M Help Needed
Post by: tim in jersey on March 20, 2006, 07:32:26 PM

One of these: http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=5357&is=REG 

and one of these: http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=284333&is=REG&addedTroughType=categoryNavigation

and you're in business.

Title: Re: Mic Stand>Shure A27M Help Needed
Post by: dennisrtyler on March 20, 2006, 07:39:27 PM

Tim...would the stand fitting with 3/8>5/8 from http://www.micsupply.com/standaccessories.htm (http://www.micsupply.com/standaccessories.htm) be the same as the B&H gear? thanks so much.

Title: Re: Mic Stand>Shure A27M Help Needed
Post by: tim in jersey on March 20, 2006, 07:41:43 PM

it is indeed. I was just about to post the link to that page, actually. Dave @ micsupply is a super-nice guy and you'd be supporting a fellow taper and his price looks to be cheaper taboot. :D

EDIT: BTW, welcome to ts.com. +T ( http://taperssection.com/index.php?topic=2298.0 )

Title: Re: Mic Stand>Shure A27M Help Needed
Post by: dennisrtyler on March 20, 2006, 07:58:56 PM

thanks for the info Tim and everybody else!!! y'all saved my ass as i have a Bela show to tape this sunday. assumming all goes well, i'll post a torrent link once i figure out how to do a CF card>flac transfer. i know the basics i just haven't actually done a transfer yet. this site has been super informative for me and i appreciate it. hopefully i'll be more of a contributer than a lurker in the future :P. thanks for the welcome Tim ;).

Title: Re: Mic Stand>Shure A27M Help Needed
Post by: tim in jersey on March 20, 2006, 08:25:10 PM

de nada