Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: flyntball on April 10, 2006, 03:11:30 PM

Title: JB3 Transferring Large .wav
Post by: flyntball on April 10, 2006, 03:11:30 PM
Hello,
I've been searching for hours on here @ taperssections.com for a solution to my problem, and now feel the need to post.

UNIT - JB3
PARTICULARS - Latest firmware, drivers & NotMad Software
ERROR - Transferring large file (1.2GB - 1.5 hours of .wav @ 44.1) from JB3 to PC fails between 10%-70%. "Access to the file is denied" or "Cannot read file".. words to that effect.
ATTEMPS - Nomad Explorer, PlayCentre, NotMad, battery only, adapter only, but ALL fail between mentioned pecentages.
OTHER TROUBLESHOOTING - Tried transfering reg. MP3s (4-5MB) with successs.
PLEAD - Help.

Thanks!
- Jim
Title: Re: JB3 Transferring Large .wav
Post by: George on April 10, 2006, 03:36:30 PM
I'm assuming your trying the usb port...try the firewire port if you haven't.  Also, maybe the cable is getting jostled?  Or maybe the contacts are dirty?  Maybe there's some sort of issue with the HDD on the NJB3?   Sorry if i'm not being too helpful.   :(
Title: Re: JB3 Transferring Large .wav
Post by: Crumbo on April 10, 2006, 03:42:26 PM
make sure you have enough room on the hard drive you are transferring to

and I would delete the bad transfer on the hard drive you are transferring (not on the JB3) to before re-trying the transfer again
Title: Re: JB3 Transferring Large .wav
Post by: flyntball on April 10, 2006, 03:52:40 PM
Thanks fot the two suggestions. Firstly, I am using USB - unit is very stable (no jigglin'). Secondly, there is plenty of room on the destination drive. I have a few different drives with plently of room, and have tried all of them. I had thought that this might have something to do with a limit for a "temp" directory, or a pagefile issue, but.. 2GB of ram, pagefile set to 1.5x that - I wouldn't THINK there would be a problem. I do not have firewire, but am hesitant to get a firewire PCI card in HOPES that it will solve my problem. USB SHOULD work.
Thanks for the help - keep it coming!
- Jim


make sure you have enough room on the hard drive you are transferring to

and I would delete the bad transfer on the hard drive you are transferring (not on the JB3) to before re-trying the transfer again
Title: Re: JB3 Transferring Large .wav
Post by: seethreepo on April 12, 2006, 12:33:01 AM
just try a simple drag and drop  if you can see the jb3 as a removable drive. IE dont use any software apart from explorer.

   
Title: Re: JB3 Transferring Large .wav
Post by: china_rider on April 12, 2006, 01:06:51 AM
You can't just drag and drop with the JB3 and explorer.  You have to use notmad or the creative software.
Title: Re: JB3 Transferring Large .wav
Post by: tfrench on April 12, 2006, 10:28:44 AM
My work laptop was reimaged this past January.  I had to reinstall all my software, etc.  I really did not want to load the originial Creative software.  I decided to try just loading the NOMAD Explorer.  It works great!  Below is what I installed:
-
http://us.creative.com/support/downloads/download.asp?sOSName=Windows+XP&region=1&Product_Name=NOMAD+Jukebox+3&Product_ID=296&modelnumber=&driverlang=1033&OS=10&drivertype=0&Image4.x=30&Image4.y=11

Applications:
Creative NOMAD Explorer (Version 3.01.10) - NMEX_PCApp_3_01_10.exe
-
Todd
Title: Re: JB3 Transferring Large .wav
Post by: jeromejello on April 12, 2006, 02:39:57 PM
that is all i use on my cpu - creative's nomad explorer (and of course the drivers)
drag and drop
piece of cake
Title: Re: JB3 Transferring Large .wav
Post by: china_rider on April 12, 2006, 02:47:48 PM
that is all i use on my cpu - creative's nomad explorer (and of course the drivers)
drag and drop
piece of cake

creative nomad explorer and (windows) explorer are differnet.  I assume because the above poster said just exploer (and mentioned a removable drive) and not creative explorer or notmad that is what he ment... could be wrong.
Title: Re: JB3 Transferring Large .wav
Post by: tfrench on April 12, 2006, 04:38:01 PM
that is all i use on my cpu - creative's nomad explorer (and of course the drivers)
drag and drop
piece of cake

Agree, best thing I've done to manage / transfer my recordings off the NJB3.
Title: Re: JB3 Transferring Large .wav
Post by: terrapinj on April 12, 2006, 06:17:52 PM
maybe try a Disk Cleanup on the JB3?
Title: Re: JB3 Transferring Large .wav
Post by: CHURCH-AUDIO on April 20, 2006, 11:40:43 AM
Smash it you know you want too. I will buy it back from you for $50 ok :) let me know lol but do not smash it ok.



Hello,
I've been searching for hours on here @ taperssections.com for a solution to my problem, and now feel the need to post.

UNIT - JB3
PARTICULARS - Latest firmware, drivers & NotMad Software
ERROR - Transferring large file (1.2GB - 1.5 hours of .wav @ 44.1) from JB3 to PC fails between 10%-70%. "Access to the file is denied" or "Cannot read file".. words to that effect.
ATTEMPS - Nomad Explorer, PlayCentre, NotMad, battery only, adapter only, but ALL fail between mentioned pecentages.
OTHER TROUBLESHOOTING - Tried transfering reg. MP3s (4-5MB) with successs.
PLEAD - Help.

Thanks!
- Jim