Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: Benny on May 29, 2006, 07:09:39 PM

Title: CSB > JB3 question
Post by: Benny on May 29, 2006, 07:09:39 PM

Want to tape a show tomorrow using my cheap Core Sounds. What setting do I need to use on the jb3 to accept the signal from the mics?  I thought I was supposed to use the "mic in" setting which gave me some levels. However, after listening to the recording there was nothing there.  Any particular gain I should be setting it at or other tips to get the best recording possible?

Sorry for the n00b question and thanks for the help!!

Title: Re: CSB > JB3 question
Post by: Fatah Ruark (aka MIKE B) on May 29, 2006, 09:21:23 PM

The JB3 does NOT power the mics so you need a battery box.

I have one if you want to use it. Just let me know.

I'm off to Denver in a little less than an hour. You're welcome to stop by and pick it up at my house.

MIKE B