Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: halteh on June 08, 2006, 12:32:44 AM
-
Wondering if anyone here has upgraded to the new firmware for their SD-722 (1.74). I did so today before radiohead only to have a myriad of problems! my battery died 1 hr into the set (normally lasts 2.5) and now the firewire won't detect proper drivers in windows. The device shows up in my device manager, but it has a yellow ! next to it indicating that proper drivers for it cannot be found. So now I can't get the show off the rcorder. Also, any ideas why my battery may have died so quickly? Any help is always appreciated!
--F
-
I have had 0 problems and have taped 6-8 shows on 1.74.
-
Guess all the recorder needed was a nights sleep! I plugged it in this morning and the pc picked it up right away. What's odd is that i had the same problem on 2 computers last night and now it's making a liar out of me on both. Oh well i'm not complaining! Radiohead here we come!!!!!! 24/96!
--F
-
Fares, is that you? Nice to see you around here.
-
Also, any ideas why my battery may have died so quickly? Any help is always appreciated!
--F
Had this happen to me a before. Found out I was accidently turning my 722 on from the outside of my bag.
-
Glad you got it working right! That sure was some odd behavior.
-
Fares, is that you? Nice to see you around here.
Sebastian! wow, i haven't seen you in like.....well i've never seen you before! but nice to hear from you, man! still taping much these days?
--F
-
now it's not interfacing with my pc again. do i have to wait till the morning again? this is getting pretty lame!
--F
-
now it's not interfacing with my pc again. do i have to wait till the morning again? this is getting pretty lame!
--F
What type of firewire card do you have? I had a lot of trouble w/ the cheap one I bought. Went to the adaptec card and everything is fine. Mac or PC?
-
now it's not interfacing with my pc again. do i have to wait till the morning again? this is getting pretty lame!
--F
I bought a cheap card off of ebay and my 722 won't connect either...I have to use my Parent's PC :P
-
mine came today w/ 1.74 installed, i'll letcha know how 3 shows go this weekend :)
-
ya know, you spend 2400 on a recorder and it doesnt even come w/ a firewire cable :P
-
mine came today w/ 1.74 installed, i'll letcha know how 3 shows go this weekend :)
and all that bitching about UPS ::)
;D Enjoy it Bean!
-
mine came today w/ 1.74 installed, i'll letcha know how 3 shows go this weekend :)
and all that bitching about UPS ::)
;D Enjoy it Bean!
well it was 2 days late :P
will do :)
-
ya know, you spend 2400 on a recorder and it doesnt even come w/ a firewire cable :P
yeah, i thought the same thing ;)
ran around to three of my local pc outlets late yesterday and none had a 6-pin to 6-pin, dang !
-
Thanks to everyone that helped. i still haven't figured out the problem but i will mess around with it a little more later. Anyways here's the show: http://www.thetradersden.org/forums/showthread.php?p=367475#post367475 let me know what ya'll think
Enjoy
--F
-
Anyways here's the show
Thanks! I really like the current tour so far...
How was the bass during "The Gloaming"? When I saw them last in 2003 (?) I could barely hear any music besides the bass ;)
-
how do you cats leave an md5 on the 722 HD ??? do you use md5summer or mkwact ???
-
how do you cats leave an md5 on the 722 HD ??? do you use md5summer or mkwact ???
got it thru md5summer :)
-
I had 1.74 on my 722 for 6 shows, no problems. I heard from SD that ver. 2.0 will be out within the next few months, and will allow data to be tranfered to an external firewire HDD without a computer.
-
I had 1.74 on my 722 for 6 shows, no problems. I heard from SD that ver. 2.0 will be out within the next few months, and will allow data to be tranfered to an external firewire HDD without a computer.
yep, HD mirroring ;D
-
2.0 is forecasted to be out by the end of this month according to the SD forums..."barring any unforeseen roadblocks."
Edit:
What I am looking forward to is the fact that mirroring to DVD-RAM/HDD will more than likely show a full firewire revision with real firewire speeds.
-
2.0 is forecasted to be out by the end of this month according to the SD forums..."barring any unforeseen roadblocks."
Edit:
What I am looking forward to is the fact that mirroring to DVD-RAM/HDD will more than likely show a full firewire revision with real firewire speeds.
No doubt!!
-
WTF!!!!
just got home from wakarusa, desperatelty trying to transfer some shows to free up space and my fucking 722 will not connect. i have never had a connection issue before. no hardware or firmware changes on computer or 722.
anyone have any quick ideas, i'm headed back up to LA in a couple hours and need to get my HD cleared up before I go....oh what a fucking day.
-
That's weird. Any chance the cable was tweaked?
Does the computer see the 722 at all? I assume you have already rebooted the computer and the 722.. Then plug the 722 into the computer? If I don't seat the fw cable correctly I can sometimes have connection problems. I usually don't boot with the 722 attached.
i usually turn the computer on then plug the 722 in once its booted and then power the 722 on. it connected the 1st time or two for a moment then i got some weird hardware issue message on the computer had to reboot and now it won't recognize at all. ive tried all combos of connecting it, computer on then turn 722 on and plug in 722 on then plug into to computer and boot up - all nothing. i've checked my device manager and there are no hardware conflicts, tried the add hardware wizard and nothing. i can't fucking believe this is happening right now. i've tried turning on the 722 with just battery power, just AC and both. did a hard drive repair, i'm out of options and lost my patience a while ago.
the FW cable has been attached to my computer and sits on tope of the tower, can't imagine how it would have gotten tweaked and I don't have a nother 6pin > 6pin device to test the cable out, its only a couple months old.
the last couple times i turned the 722 on there have been weird patterns on the startup screen. WTF is going on!?!?
-
I think this will work.
http://www.sounddevices.com/download/7_firmware/722_1.46.zip
-
Do you have another FW device you can test on the same cable/port? At this point, we don't have enough information to tell if it's the 722 hardware, 722 software, the cable, the FW card, other computer hardware, or computer software. Try to eliminate a few of these so we can help you a little better.
Edit: I wouldn't go doing a firmware install on a machine whose data you want to keep intact.
-
Do you have another FW device you can test on the same cable/port? At this point, we don't have enough information to tell if it's the 722 hardware, 722 software, the cable, the FW card, other computer hardware, or computer software. Try to eliminate a few of these so we can help you a little better.
Edit: I wouldn't go doing a firmware install on a machine whose data you want to keep intact.
nothing else that has 6pin to 6pin. i've got to go to LA now won't have a chance to mess with is now again until this weekend. ive got about 11 hrs left of record space but I really didn't want to fill the HD up all the way.
thanks for the help.
-
awesome - after hours of flipping out and getting upset that my 722 may have issues, i replaced the 2 month old firewire card ion my new comp and voila connected first time!!!
-
Get ready....
Since our FireWire "stack" is all new in the upcoming 2.0 release (with a complete rewrite of the 40,000+ lines of C code just for FireWire...), we will be getting to 2.0 in a couple of steps.
We will first be posting a new 1.XX beta release which will include the new FireWire code withOUT host mode. This will essentially give you the identical functionality of the present 1.74 release with the added benefit of both CF and HD access (722 aand 744T), plus a healthy speed increase. We will open this release up to any user that wants to try it. We are quite confident in it, but it won't be an "official" release. We'll also keep the present 1.74 release available. We believe this will eliminate the lingering connectivity issues we are seeing in Win OS. I won't quote a specific date on this first step to 2.0, but it will be very soon.
As far as the 2.0 release, we are heavily testing this code to assure its completeness and stability. The 2.0 release includes the control for the CL-1 remote control. We have CL-1's built and ready to go, but they ultimately depend on this release for their operation. We will also first publish the 2.0 as a public beta for the brave to wring out. We have lots of very knowledgeable users here that can identify things we simply didn't consider. We'll make certain to let you all know when these releases are available.
If you have registered your recorder, you will receive an email when new firmware releases are available. If you don't think you have registered, go to our site and drop us your serial number and contact information - http://www.sounddevices.com/register
-
Get ready....
Since our FireWire "stack" is all new in the upcoming 2.0 release (with a complete rewrite of the 40,000+ lines of C code just for FireWire...), we will be getting to 2.0 in a couple of steps.
We will first be posting a new 1.XX beta release which will include the new FireWire code withOUT host mode. This will essentially give you the identical functionality of the present 1.74 release with the added benefit of both CF and HD access (722 aand 744T), plus a healthy speed increase. We will open this release up to any user that wants to try it. We are quite confident in it, but it won't be an "official" release. We'll also keep the present 1.74 release available. We believe this will eliminate the lingering connectivity issues we are seeing in Win OS. I won't quote a specific date on this first step to 2.0, but it will be very soon.
As far as the 2.0 release, we are heavily testing this code to assure its completeness and stability. The 2.0 release includes the control for the CL-1 remote control. We have CL-1's built and ready to go, but they ultimately depend on this release for their operation. We will also first publish the 2.0 as a public beta for the brave to wring out. We have lots of very knowledgeable users here that can identify things we simply didn't consider. We'll make certain to let you all know when these releases are available.
If you have registered your recorder, you will receive an email when new firmware releases are available. If you don't think you have registered, go to our site and drop us your serial number and contact information - http://www.sounddevices.com/register
AWESOME 8) whered you get that info at martin?
so firewire speeds will be increased on the beta mirroring the 1.74 release? thats killer as well :)
i have no need for the HD mirroring cause 40GB is plenty of storage for me at the moment :) but it is a sweet feature
-
this is indeed good news martin, we'll finally get to see transfer speeds greater than 3.1mb/s !
bean, the info was posted on the sound devices support forum (http://www.sounddevicesupport.com).
brett.
-
So, has anyone given this a whirl yet?
http://www.sounddevices.com/download/7-beta.htm
-
http://taperssection.com/index.php?topic=67216.0
So, has anyone given this a whirl yet?
http://www.sounddevices.com/download/7-beta.htm