Text only | Text with Images

Taperssection.com

Gear / Technical Help => Cables => Topic started by: airbladder on June 29, 2006, 11:59:04 AM

Title: Need a Rt angle SPDIF!
Post by: airbladder on June 29, 2006, 11:59:04 AM
I am looking for a 3ft SPDIF cable to go from my minime into a hd-pd.  I want the end going into the p2 to be a right angle connector.  Anyone out there make these or know where I can buy on new?  Any help would be great.  Ed
Title: Re: Need a Rt angle SPDIF!
Post by: eric.B on June 29, 2006, 12:02:44 PM
deadheaded here..    kindkables.com on the web..   just shoot him an email and he'll make what you need...
Title: Re: Need a Rt angle SPDIF!
Post by: Scooter on June 29, 2006, 01:08:21 PM
another option is to get a "L" adpter from radio shack.  female rca on both ends, gold.

Edit:  i meant male on one end female on the other, like the link below...
Title: Re: Need a Rt angle SPDIF!
Post by: dueling on June 29, 2006, 03:15:07 PM
I use one of Ed's coax cables and picked up a pair of these to go from my V3 into my HD-P2.. works great.

http://www.amazon.com/gp/product/B00004Y3TY/102-0717411-6413709
Title: Re: Need a Rt angle SPDIF!
Post by: airbladder on June 29, 2006, 03:25:21 PM
I ordered the cable I was looking for from Ed at Kindkables.  Thanks for the info. 
Title: Re: Need a Rt angle SPDIF!
Post by: vishwa on July 09, 2006, 08:42:04 AM
is there signal loss from using a radio shack elbow? thats waht i use
should i be using one like Ed's?
Title: Re: Need a Rt angle SPDIF!
Post by: Phil on July 15, 2006, 01:38:21 AM
Quote from: vishwa on July 09, 2006, 08:42:04 AM
is there signal loss from using a radio shack elbow? thats waht i use
should i be using one like Ed's?

I use one also.  No signal loss, but you are introducing another link in the chain.
Text only | Text with Images