Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: barrettphisher on July 20, 2006, 08:45:14 PM

Title: BUZZ!!!
Post by: barrettphisher on July 20, 2006, 08:45:14 PM

Hey,
Last night I ran off the board for Leo Keotte at the opera house, same feed/setup as always.  During soundcheck I noticed a buzz coming out the FOH speakers, but didn't think much as it was pretty quiet.  I listened to my setup and could it hear it as well.  Well we swapped out some cables and it went away.  But I did start to notice it more during the set.  To make a long story short I don't know where it came from, but is this possible to remove?  I'm using Cool Edit Pro.  Thanks.
Barrett

Title: Re: BUZZ!!!
Post by: Chuck on July 20, 2006, 08:50:33 PM

If you are patient almost anything is possible if you have the right tools. If the buzz isn't broadband it may be easier to remove. I have the WAVES 10 band para-graphic EQ. I think it sounds pretty good for digital processing.

Title: Re: BUZZ!!!
Post by: anodyne33 on July 21, 2006, 02:12:51 AM

it's most likely 60 or 120hz. hop on it with a sweepable parametric with a really narrow q.