Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: macacopowa on August 03, 2006, 04:31:20 PM

Title: AA catched into MP-2
Post by: macacopowa on August 03, 2006, 04:31:20 PM

This is incredible, one AA batt is catched into my mp2.  Anybody know how to remove it?  if I open the mp-2 could remove it?
It's a AA rechargeable, but I tried with the same brand an all go ok (energizer 2500). Any idea? I can use any kind of lubricant?
(http://img70.imageshack.us/img70/8176/dscn3998fh8.th.jpg) (http://img70.imageshack.us/my.php?image=dscn3998fh8.jpg)
(http://img324.imageshack.us/img324/9058/dscn3999bx5.th.jpg) (http://img324.imageshack.us/my.php?image=dscn3999bx5.jpg)

Title: Re: AA catched into MP-2
Post by: bluegrass_brad on August 03, 2006, 04:54:17 PM

the sd mod is just for the spring on the screw end of the battery unit

Title: Re: AA catched into MP-2
Post by: OOK on August 03, 2006, 11:43:50 PM

try using a little dabof 5minute epoxy on the end of a small  bamboo skrewer. Put a dab on the end of the skrewer hold it against the battery, let dry in 10 minutes slowly pull the battery out.  A little squirt of silicone around the outside of the battery might also help.  but don't squirt the silcone spray until the epoxy is set.....just a thought..

Title: Re: AA catched into MP-2
Post by: macacopowa on August 04, 2006, 09:02:57 AM

thanks for all the advice, finally all it's ok, i go to my local electronic store, good job for 8$ ;D

Title: Re: AA catched into MP-2
Post by: treespine on August 04, 2006, 09:07:03 AM

Quote from: OtheroneK on August 03, 2006, 11:43:50 PM

try using a little dabof 5minute epoxy on the end of a small  bamboo skrewer. Put a dab on the end of the skrewer hold it against the battery, let dry in 10 minutes slowly pull the battery out.  A little squirt of silicone around the outside of the battery might also help.  but don't squirt the silcone spray until the epoxy is set.....just a thought..

holy shit, that is a great idea.  t+

Title: Re: AA catched into MP-2
Post by: scb on August 04, 2006, 03:47:47 PM

magnet?

Title: Re: AA catched into MP-2
Post by: joekar on August 04, 2006, 04:29:51 PM

OK......I'm sitting on the edge of my seat........How did they get the battery out ??... Enquiring minds need to know....

Peace,
jk

Title: Re: AA catched into MP-2
Post by: macacopowa on August 14, 2006, 08:26:59 AM

Well, I think that unscrew the compartment of the internals, the internal was catched because have a piece of tape and it hit with the end of compartment that have less diameter. Sorry for my poor explanation, I not have any idea about electronics

Title: Re: AA catched into MP-2
Post by: aberg on August 14, 2006, 10:38:08 AM

Quote from: macacopowa on August 14, 2006, 08:26:59 AM

Well, I think that unscrew the compartment of the internals, the internal was catched because have a piece of tape and it hit with the end of compartment that have less diameter. Sorry for my poor explanation, I not have any idea about electronics

If I'm hearing you right, you're saying that your battery had a peice of tape around it and that's why it got stuck?

Title: Re: AA catched into MP-2
Post by: macacopowa on August 14, 2006, 11:01:37 AM

yes, I put it to differentiate from another pair of AA rechargeables, now, learn with my mistake and my AA now are like this.(http://img65.imageshack.us/img65/1590/dscn4193dw6.jpg)