Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: Nick in Edinboro on September 21, 2003, 11:00:23 PM
-
In a stoned stupor I decided to cut a Derek Trucks song into three chunks during my CDWave session ???
Now instead of writing my tracklisting as Joyful Noise pt. 1, 2, and 3 I'd like to join'em but not sure how would be easiest.. I was hoping there was some program that could just "do it" instead of cutting and pasting the three wavs into a new wav in Cool Edit or something..
Searched TS.com, looked through the archives.. still not sure?
Any help much appreciated! Now that I'm armed with a firewire card for the jukebox I can get shows off the JB3. I'm currently uploading a Railroad Earth show to the archive for sampling of my ADK SC-T's!
Take care,
Nick
-
In a stoned stupor I decided to cut a Derek Trucks song into three chunks during my CDWave session ???
Now instead of writing my tracklisting as Joyful Noise pt. 1, 2, and 3 I'd like to join'em but not sure how would be easiest.. I was hoping there was some program that could just "do it" instead of cutting and pasting the three wavs into a new wav in Cool Edit or something..
Searched TS.com, looked through the archives.. still not sure?
Any help much appreciated! Now that I'm armed with a firewire card for the jukebox I can get shows off the JB3. I'm currently uploading a Railroad Earth show to the archive for sampling of my ADK SC-T's!
Take care,
Nick
ive been wondering the SAME thing, nick....hope there is an easier way.... ??? 8)
-
WAVGLUE.. :D
http://www.dlcsistemas.com/msx/html/body_utilities.html
http://www.dlcsistemas.com/msx/bin/waveglue.zip
DOS utility (miss these in this GUI day.. good ol' batch style)..
Just did it and listening to it now, seamless and "pop free" on the joins. ;D
-
If you like a GUI you can use WavMerge http://www.mrichter.com/cdr/files/wavmerge.zip
The other cool thing about this software is when you pop the wave files in and look at the time, a '+' is displayed if the file is not cut to cd sector size. I often use it just to check files for sector compliance.
david
-
shntool has a join method
-
Can't you just do a C&P in soundforge ?
-
Thanks guys, +T's all around.. gonna get WavMerge just for fun too..
Mark, didn't you even read my question :P BTW, do you want that RRE show? There was some 460's and some Sennheisers (sp?) there too, guy named Pete I believe.. They actually got the whole show ::) Didn't know if you'd want another source...sounds great. They basically did a left stack tape, I was DFC.
some program that could just "do it" instead of cutting and pasting the three wavs into a new wav in Cool Edit or something
-
Thanks guys, +T's all around.. gonna get WavMerge just for fun too..
Mark, didn't you even read my question :P BTW, do you want that RRE show? There was some 460's and some Sennheisers (sp?) there too, guy named Pete I believe.. They actually got the whole show ::) Didn't know if you'd want another source...sounds great. They basically did a left stack tape, I was DFC.
some program that could just "do it" instead of cutting and pasting the three wavs into a new wav in Cool Edit or something
Heh obviously not :bigsmile:.
Peter Doerr is a great guy from Mich, he will sometimes run his Senn's & an AT822 mic through a simple radioshack mixer into a sbm1 with great results, don't know who the 460's would belong to though ... Yeah I would be interested in hearing your ADK's, can I can DL from you somewhere ?
-
I'm trying to upload it to "the archive" now... first disc is on their and am transferring the second one now, although at 20kb/sec it's gonna take a while! I'd think we could do it via some IM software too or something, or perhaps I can offer it on Further? Up for whatever...
I think I've got their e-mail addresses laying around if you wanted to find the 460 guy too, he was running them into a oade brick, but not sure if it was a 248 or a 148 into a Marantz pro MD deck. Remember them both being very excited about my JB3, as they're looking into buying one.. ;D
-
addawav is the easiest one I have used!
daryan
-
you can append files in EAC...
-
shntool join *.wav
-
shntool join *.wav, definitely...
T