Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: macacopowa on August 14, 2006, 08:20:37 AM
-
Hi all, recently i bought an mp2 and the improvement on the sound it's evident, but new doubts coming to my mind. The big doubt it's about the needed about an AD converter or not. I'm explain, my actual rig it's this:
CMC-8 > samson PM-4 > MP-2 > R1
I'm thinking about put in the middle of my preamp and the recorder a sbm-1. How are your opinion about the AD of the R1?
If I go to sbm-1 I will have to change the recorder for go to digital , the R1 don't have optical in. I have an iriver, but I will lose the possibility of recording in 24 bits ...youyouyou many doubts for noob mind...any opinion it's been thankful
Here a sample from yesterday, my first attempt with the mp2, set the leves on the MP-2 at 8 o'clock and the gain on my R1 not at maximum.
http://jula-julasite.iespana.es/cmc8-MP2-R1.flac
-
stick with the R1. From what I have heard the A/D compares pretty positively with the Oade mod SBM1...so you probably wouldnt see the improvement you are looking for.
-
R-1 is way sufficient. If you dig enough, you can find messages where certain members state that the A/Ds on the R-1 made them feel that they could abandon their V3s. :o
-
thanks for the comments, I will save my money for other components ;D
-
thanks for the comments, I will save my money for other components ;D
good call!
-
i bet you would notice more of an improvement in your rig if you upgraded your mics instead of adding an A/D. you're probably much better off sticking with the r-1 especially for stealthability