Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: cjs42079 on August 28, 2006, 03:58:27 PM
-
Hey everyone, this is my first post here (but I've been stalking for a few weeks now). I found these forums while researching help on my JB3. My unit worked perfectly fine for a while, then recently it started to freeze up on me. After the first few freezes, I was able to get it running again by resetting it but now it seems to be forever frozen at the EAX screen upon start up. I've searched these forums well and have seen other people with similar problems, and I have tried all the solutions they offered. One guy even suggested giving it a good whack, haha. That didn't work for me either.
I'm now left wondering, is this thing trash?? Creative doesn't support repairs for thse anymore and I'm not sure who does. I bought this as a more modern/convenient replacement for my Sony D7 but now I'm left frustrated. Any suggestions? Thanks!
---Chris---
-
still frozen after pushing the reset button?
-
This sounds like a hard drive problem where you have bad sectors on your drive and its corupting the op system try a reload of the hard drive I know there is a way to do it outside of the machine dont ask me how.
Chris Church
Hey everyone, this is my first post here (but I've been stalking for a few weeks now). I found these forums while researching help on my JB3. My unit worked perfectly fine for a while, then recently it started to freeze up on me. After the first few freezes, I was able to get it running again by resetting it but now it seems to be forever frozen at the EAX screen upon start up. I've searched these forums well and have seen other people with similar problems, and I have tried all the solutions they offered. One guy even suggested giving it a good whack, haha. That didn't work for me either.
I'm now left wondering, is this thing trash?? Creative doesn't support repairs for thse anymore and I'm not sure who does. I bought this as a more modern/convenient replacement for my Sony D7 but now I'm left frustrated. Any suggestions? Thanks!
---Chris---
-
Tom, yea it's still freezing after hitting the reset button (as well as after doing a clean disk and a format)
Chris, I don't know how to do it either but i will cerainly research around for that solution.
Anyone else here know how to reload the hard drive on a JB3? I thought I migh add that I am using the external power source (ac adapter) to power the unit so it's shouldn't be a problem with the batteries that a lot of people speak of. Thanks again
---Chris---
-
in the knowledgebas section here there is an FAQ which should include how to reload the os. if that doesn't work try nomadness.net
-
in the knowledgebas section here there is an FAQ which should include how to reload the os. if that doesn't work try nomadness.net
here is the link to the faq
http://taperssection.com/index.php?topic=16338.0 (http://taperssection.com/index.php?topic=16338.0)
I'll 2nd the opinion of reloading the os
If that doesn't work, maybe a new hardrive installed. The process to do this is also somewhere in the faq or archive.