Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: vwmule on September 22, 2006, 02:11:57 AM

Title: CSB > JB3 - how to?
Post by: vwmule on September 22, 2006, 02:11:57 AM

What's the best way to record with this set up? Can someone walk me through?

Title: Re: CSB > JB3 - how to?
Post by: vwmule on September 22, 2006, 10:37:18 AM

basically I'm wondering how to set it up. Do I go line in? And if so, what settings do I use?

Title: Re: CSB > JB3 - how to?
Post by: rustoleum on September 22, 2006, 11:08:33 AM

mic-in on the JB3 sucks (very noisy)... the line-in is better as long as you've got enough gain to get decent levels (though I'm still on the lookout for a cheap AD20 or similar so I dont have to use it either)... You might need to put a preamp or a line-transformer in between the CSBs and the JB3.  I recall finding a great web site where someone did some extensive testing of the mic-in vs line in... my own ears have told me this guy was right on when he recommended never using mic-in.