Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Matt Quinn on December 06, 2006, 10:37:08 AM
-
Hi!
So I've been using this thing in the field with a laptop just fine, and decided to pick up a MT 2496. I've been going out of the USB to the laptop, so I've never properly tested the SPDIF input & output. I hooked the MT 2496 up to a spdif out on my Electrix Repeater, it worked flawlessly. But when I hook the MT up to the SPDIF out on the Fast Track, I get nothing, no signal going from the Fast Track to the MT. I've set all the inputs & outputs in the control panel to on, not sure what I could be missing. This is gonna suck if I can't make it work, either the MT is useless until I get another pre/adc & I'll need to go back to dragging around the laptop, or I'll have to go analog into the MT.
Any help is appreciated!
-
solved!
+T to M-Audio tech support ;D
-
Nice. If you wouldn't mind, what was the solution?
It might be useful to someone else down the line.
thanks and +t in advance...
-
Nice. If you wouldn't mind, what was the solution?
It might be useful to someone else down the line.
thanks and +t in advance...
I had to go Start>Control Panel>Sounds & Audio>Audio Tab, Change Sound Playback device to the FastTrackPro's outputs 3/4.
:)
-
Cool. Sometimes, the simplest solution can be the most elusive.
-
Cool. Sometimes, the simplest solution can be the most elusive.
For sure. I figured the FTP's control panel software would change those settings when you activate them, but I guess not.
-
That 'control panel' is weaksauce, to say the least...