Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: rasta on December 11, 2006, 02:05:47 PM

Title: Acoustic recording
Post by: rasta on December 11, 2006, 02:05:47 PM
I am recording an acoustic show from a table about 5 ft. from artist.  I only have card caps.  Assuming I can sit directly infront of the artist, what configuration should I use?  If I sit off center how should I adj. my mics?
Title: Re: Acoustic recording
Post by: kskreider on December 11, 2006, 02:10:20 PM
I record a lot of acoustic music x/y 90 degrees with pleasant results.
Title: Re: Acoustic recording
Post by: db on December 11, 2006, 05:07:35 PM
I am recording an acoustic show from a table about 5 ft. from artist.  I only have card caps.  Assuming I can sit directly infront of the artist, what configuration should I use?  If I sit off center how should I adj. my mics?



kind of room? size? amplified at all? how many instruments? vocals?

Title: Re: Acoustic recording
Post by: BayTaynt3d on December 11, 2006, 07:18:27 PM
If it's one musician solo, and you can run onstage right in front of them, then I second XY all the way. Also, if it is only one sound source (solo instrumentalist), I might even run the XY a little tighter than 90 degrees, say 70 degrees or so. The reason is that with a full 90 degrees, you're really only picking up the main sound source off-axis to the cards and the by summing them the image places the source in the middle of the image. Thing is, in this case, then you're only getting your main sound source on the off-axis part of your mics, which can be colored and generally not as good as straight on. And in the case of one instrument, you aren't going to be getting much of a stereo image anyway, so I'd pull in the angle a bit so the mics are picking up the sound more in there sweet spot. Anyway, that's my two cents....
Title: Re: Acoustic recording
Post by: John Willett on December 16, 2006, 07:23:44 PM
ORTF