Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: Kevin on October 10, 2003, 06:02:18 PM
-
heres some pics of the one I have, bought it from pro digital and want to see if someone will modify to an oade type. its got an input (orange) for my dat to recieve the signal from the pre and the purple is the out to send to patchers
-
another pic
-
what's wrong with it?
-
I soldered the right angle on after I broke the straight angle and im not getting a signal. I have another one exactly like this one and would like something different. Also used the oade one last weekend in austin and liked it alot.
-
I soldered the right angle on after I broke the straight angle and im not getting a signal.
whoops
my prodig active won't pass a signal. hooray.
-
ye but I cant get a signal to my deck :'(
-
I'd take a look at it, but I don't have the equipment (read: deck) to test it
-
So you want a shorter cable length then? I don't know what p[art oade uses for their rca's, but if you figure it out, I am willing to wire it.
Daryan
-
sweet! ill see if I can figure out what it is and ye id want it shorter about 3/4 the length of a pencil (doesnt need to be anything specific whatever length you make it is fine with me)
-
I can make the cable if you like.....
-
You can get that Y splitter from radio shack.
Go Tandy!