Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: funkoff13 on January 24, 2007, 03:51:37 PM

Title: vark bar question
Post by: funkoff13 on January 24, 2007, 03:51:37 PM: I need some spacers for my bar. Where do I get them at? Thanks for the help!

billee
Title: Re: vark bar question
Post by: terrapinj on January 24, 2007, 04:52:51 PM: Jerry should be able to take care of you

http://www.posthorn.com/
Title: Re: vark bar question
Post by: Colin Liston on January 24, 2007, 06:25:07 PM: I can't seem to be able to unscrew the threaded screws all the way through the vark bar. Aren't they supposed to be able to come all the way out to be able to change places?
Title: Re: vark bar question
Post by: Brian Skalinder on January 24, 2007, 06:28:19 PM: Quote from: Colin Liston on January 24, 2007, 06:25:07 PM
I can't seem to be able to unscrew the threaded screws all the way through the vark bar. Aren't they supposed to be able to come all the way out to be able to change places?

Yes, they're supposed to unscrew all the way to change positions. I have the same issue as you mention and keep an allen key in my bag to assist. The plastic bar's threads get cross-threaded over time, and eventually require the key to fully unscrew.
Title: Re: vark bar question
Post by: Colin Liston on January 24, 2007, 08:10:19 PM: Quote from: Brian Skalinder on January 24, 2007, 06:28:19 PM
Quote from: Colin Liston on January 24, 2007, 06:25:07 PM
I can't seem to be able to unscrew the threaded screws all the way through the vark bar. Aren't they supposed to be able to come all the way out to be able to change places?

Yes, they're supposed to unscrew all the way to change positions. I have the same issue as you mention and keep an allen key in my bag to assist. The plastic bar's threads get cross-threaded over time, and eventually require the key to fully unscrew.

Nice, thanks, I'll give it a shot.
Title: Re: vark bar question
Post by: funkoff13 on January 25, 2007, 03:20:42 AM: I have also used a little bicycle chain lubricant to loosen mine up a bit.
Title: Re: vark bar question
Post by: JNT on February 06, 2007, 10:41:14 PM: Bought mine from Jerry as well. I haven't needed an allen key to change mine yet but I probably should carry one just in case.

Joe