Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: phatDats4u on February 03, 2007, 11:40:28 AM

Title: HELP: vxPocket users
Post by: phatDats4u on February 03, 2007, 11:40:28 AM

Taped JMp last night. It went well except for the plan to tape to the lappy, I couldn't get signal from the UA-5 coax out >:(. Any thoughts?

Title: Re: HELP: vxPocket users
Post by: cleantone on February 03, 2007, 11:46:38 AM

I have found that depending on the order things are patched and turned on I have to open the VX Control and switch from digital to analog and back to digital. This is done with the recording software open. That is of course assuming all of your internal routing on your laptop was proper. I assume you've done it at home?

Title: Re: HELP: vxPocket users
Post by: stirinthesauce on February 03, 2007, 11:52:21 AM

yup, strange things happen when laptop taping sometimes.  Especially when running multiple channels.  Always check your routing, soundcard/interface settings.  If all still fails, reboot and start the process over.

+t for the headache

Title: Re: HELP: vxPocket users
Post by: Professor chaos on February 12, 2007, 05:18:04 PM

did you try downloading another driver from the digigram website? the only one that worked for me was the oldest one. also click on the digigram logo aon the tool bar and make sure that the card is set for digital in. the default is for analog in. i hope this helps, these were the things that i needed to change in order to get mine working. let me know how you make out.

Title: Re: HELP: vxPocket users
Post by: OFOTD on February 12, 2007, 06:03:10 PM

Which are you running the V2 or 440?

Title: Re: HELP: vxPocket users
Post by: phatDats4u on February 12, 2007, 07:07:26 PM

Hey there good folks-it's a V2 card, and I've been having better luck since the JMP rochester show also.  I've found that adjusting the ASIo driver several times and a reboot will fix the problem. I hate mac's, but for this purpose they almost seem apealing after having windows freeze, shut down, etc.

Title: Re: HELP: vxPocket users
Post by: hzgone on February 15, 2007, 12:14:42 AM

+T for your troubles.  The only problem i have had with the vxpocket is making sure i have the right bit rate selected when i start a new file.

Title: Re: HELP: vxPocket users
Post by: tim in jersey on February 15, 2007, 11:13:41 AM

I feel your pain phatDATS.

I sure don't miss dealing w/ that at shows. Yuck.