Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Sterling on October 14, 2003, 07:36:27 PM

Title: UA5...needs a mod before I can use?
Post by: Sterling on October 14, 2003, 07:36:27 PM

So I can't just use it with my Oktava 012 and Sony MD? It needs to be mod before I can? or should I just go with a cheap phantom power unit then a AD-20 or something? Thanks guys, you all rock.
Sterling
PS-HELP!! :help:

Title: Re:UA5...needs a mod before I can use?
Post by: Brian Skalinder on October 14, 2003, 07:43:04 PM

Ahem.  Check the Archival Info section:   :P

http://www.taperssection.com/yabbse/index.php?board=14;action=display;threadid=5209 (http://www.taperssection.com/yabbse/index.php?board=14;action=display;threadid=5209)

Title: Re:UA5...needs a mod before I can use?
Post by: Sterling on October 14, 2003, 07:47:06 PM

Thank you, and I tried to look in the archives so quite sticking your tongue out at me dude. :P
But thank you and +T to ya.
Sterling
PS- did I do that right?

Title: Re:UA5...needs a mod before I can use?
Post by: Sean Gallemore on October 15, 2003, 03:21:58 AM

first issue:  I believe you need the digimod so you can go optical (digital) out to your MD, same goes for the JB3. someone correct me if I'm wrong, I'm just making an assumption from what I've been reading

second: you can't +T anyone yet until you get 50 posts ;)

Title: Re:UA5...needs a mod before I can use?
Post by: caymanreview on October 15, 2003, 07:31:31 AM

Quote from: Stealth Master Schwilly on October 15, 2003, 03:21:58 AM

first issue:  I believe you need the digimod so you can go optical (digital) out to your MD, same goes for the JB3. someone correct me if I'm wrong, I'm just making an assumption from what I've been reading

second: you can't +T anyone yet until you get 50 posts ;)

you are correct, you need the digi mod to use as a standalone device... and for the money, imho this is where its at... with the right mod- be it warm or presence-

Title: Re:UA5...needs a mod before I can use?
Post by: Simp-Dawg on October 18, 2003, 06:37:20 PM

Quote from: Stealth Master Schwilly on October 15, 2003, 03:21:58 AM

first issue:  I believe you need the digimod so you can go optical (digital) out to your MD, same goes for the JB3. someone correct me if I'm wrong, I'm just making an assumption from what I've been reading

second: you can't +T anyone yet until you get 50 posts ;)

well, almost....the mod doesn't just enable the optical, it allows it to be used without a computer hooked up by usb, as caymanreview said, standalone.
both digi outs are available simultaneously i believe, regardless of how it is being run (usb connected or standalone).
these have gotten some great reviews, especially with the oade mods.  i am not yet certain of their status on being bit perfect however.
and if you want the oade mod you must buy the ua5 from oade, they will not mod other units.

Title: Re:UA5...needs a mod before I can use?
Post by: MattD on October 18, 2003, 06:59:30 PM

I have heard that none of the Edirol units pass a bit-perfect digital signal.

-Matt

Title: Re:UA5...needs a mod before I can use?
Post by: Brian Skalinder on October 18, 2003, 07:49:44 PM

The UA5 is not bit perfect if passed a digital signal.  If you're transferring DATs through the UA5 to CD, the UA5 resamples whether you're going from sample rate A to sample rate A or from A to B.  Doesn't matter.  However, for standalone use as a pre/ADC for taping - where we go analog in - the bit imperfectness is a moot point.

Title: Re:UA5...needs a mod before I can use?
Post by: Simp-Dawg on October 20, 2003, 02:25:16 PM

Quote from: Brian Skalinder on October 18, 2003, 07:49:44 PM

The UA5 is not bit perfect if passed a digital signal.  If you're transferring DATs through the UA5 to CD, the UA5 resamples whether you're going from sample rate A to sample rate A or from A to B.  Doesn't matter.  However, for standalone use as a pre/ADC for taping - where we go analog in - the bit imperfectness is a moot point.

thanks for that info brian