Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: mikesalvo on March 26, 2007, 03:25:00 PM

Title: best place for mic. hardware (clamps, arms, etc...,)
Post by: mikesalvo on March 26, 2007, 03:25:00 PM

anyone have a place they are partial to when buying hardware like i mentioend in the subject. I need a few things. Specifically an arm and one of those things that raises one side of my t-bar so I can go XY.

any help would be appreciated!

Title: Re: best place for mic. hardware (clamps, arms, etc...,)
Post by: jkbyram on March 26, 2007, 03:29:28 PM

hi end camera shops can sometimes have things you can use.

Title: Re: best place for mic. hardware (clamps, arms, etc...,)
Post by: stirinthesauce on March 26, 2007, 03:38:02 PM

www.micsupply.com (http://www.micsupply.com)

www.bhphoto.com (http://www.bhphoto.com)

Title: Re: best place for mic. hardware (clamps, arms, etc...,)
Post by: stevetoney on March 27, 2007, 02:09:09 AM

www.posthorn.com

Not sure if it's the _best_ place, but they have some variety and some of the hardware they sell looks indestructable.  They list an ultraclamp near the top of their listing that looks perfect...$33.

I've bought stuff from sam ash and zzounds also. 

www.samash.com

www.zzounds.com

Sam Ash has a variety of uniquely designed clamps but not sure how well they work.  I've got one ordered now (the one with a clip on each end) in fact just to check it out to see how rugged and reliable it is for field use. 

Sam Ash also has a real nice $10 clamp that attaches to the shaft of a micstand and has a 5/8inch male adapter at the end of a six inch arm, upon which you can attach a T-Bar.  Perfect for hitchhiking onto someone elses mic stand at a show.

Title: Re: best place for mic. hardware (clamps, arms, etc...,)
Post by: stevetoney on March 27, 2007, 02:25:26 AM

I re-read your post and missed your request for X-Y coincident TBar.  This Vark Bar might be what you want.

http://www.posthorn.com/Macvk_4.html

Title: Re: best place for mic. hardware (clamps, arms, etc...,)
Post by: mattb on March 27, 2007, 03:22:04 PM

Quote from: tonedeaf on March 27, 2007, 02:09:09 AM

www.posthorn.com

Not sure if it's the _best_ place, but they have some variety and some of the hardware they sell looks indestructable.  They list an ultraclamp near the top of their listing that looks perfect...$33.

I have an UltraClamp and I love it. Simple and reliable. I think I paid somewhere around $20 by using Froogle to find it the cheapest.
The same company also makes the UltraPod, which I have too and it's also very handy.