Print Page - Earthworks TC, QTC, or M series mic owners step inside.

Title: Earthworks TC, QTC, or M series mic owners step inside.
Post by: JD on April 06, 2007, 11:11:17 PM

I am curios what the outer diameter of the mic is on the diaphragm end, for the TC, QTC or M series Earthworks mics.

Looking at the possibility of using a set of Earthworks OMW2 windscreens on the Avenson STO-2 mics I just got from Jon.

Thanks

Title: Re: Earthworks TC, QTC, or M series mic owners step inside.
Post by: wbrisette on April 06, 2007, 11:46:57 PM

The QTC series is approximately .25-in. in diameter. The SR series is approximately .50-in in diameter.

Wayne

Title: Re: Earthworks TC, QTC, or M series mic owners step inside.
Post by: JD on April 06, 2007, 11:53:58 PM

Thanks for the info Wayne. +T

The Avenson's are .290" so the OMW2 windscreens should work. :)

Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: JD on April 06, 2007, 11:11:17 PM