Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: saxophoner on April 10, 2007, 02:25:50 AM
-
cant find my manual and havent transfered anything from the 660 to the computer yet... can't figure it out either. i turn it on with it plugged into the computer, i see the USB/COPY button, so i push that and it reads No. V Track and goes back to the time signature. is there a driver? i haven't found one...
Thanks
Travis
-
if its anything like the 671, once connected via usb, you have to hold down that button while you turn it on.
-
Yes, what he said. Hold the USB button and then turn on the machine and you should see USB on the screen.
-
cant find my manual and havent transfered anything from the 660 to the computer yet... can't figure it out either. i turn it on with it plugged into the computer, i see the USB/COPY button, so i push that and it reads No. V Track and goes back to the time signature. is there a driver? i haven't found one...
Thanks
Travis
I would use a cf card reader instead. I have a 660 and can transfer a 2 gig card in a couple minutes. I think the transfer time straight from the 660 is a good bit longer. My reader was only like 19 dollars or something like that.
-
it worked! plus t's round