Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: grayp on April 12, 2007, 04:41:31 PM

Title: Schoeps with phantom power and no preamp
Post by: grayp on April 12, 2007, 04:41:31 PM

A buddy just called and was loaned a pair of schoeps but only has a ps2.

Will this have a hot enough signal?   Used to work with my 480s.

Just curious.

Title: Re: Schoeps with phantom power and no preamp
Post by: Craig T on April 12, 2007, 04:52:48 PM

what are you recording with?

Title: Re: Schoeps with phantom power and no preamp
Post by: jmerin on April 12, 2007, 04:54:27 PM

as long as the ps2, is 48 volts then you can power the schoeps.

Title: Re: Schoeps with phantom power and no preamp
Post by: Guide Pup Raiser on April 12, 2007, 05:38:20 PM

Quote from: jmerin on April 12, 2007, 04:54:27 PM

as long as the ps2, is 48 volts then you can power the schoeps.

he has a modsbm, jb3.  i was just concerned about how hot the signal would be.

Title: Re: Schoeps with phantom power and no preamp
Post by: JasonSobel on April 13, 2007, 04:17:45 PM

Quote from: Guide Pup Raiser on April 12, 2007, 05:38:20 PM

Quote from: jmerin on April 12, 2007, 04:54:27 PM

as long as the ps2, is 48 volts then you can power the schoeps.

he has a modsbm, jb3.  i was just concerned about how hot the signal would be.

you'll probably be fine at a loud rock show.  for quieter, acoustic shows, you'll probably need more gain.