Print Page - Using External Word Clock to Drive a AD1k with a bad clock

Title: Using External Word Clock to Drive a AD1k with a bad clock
Post by: H₂O on April 20, 2007, 03:24:36 PM

Does anyone think the following device could drive an AD1K with a failing Word Clock?

http://www.hosatech.com/hosa/products/WDC-427.html#

I know Ethan covered his results in a previous post, and had success using a V3 as a source for Rev D AD1k

http://taperssection.com/index.php/topic,80192.msg1067476.html#msg1067476

Title: Re: Using External Word Clock to Drive a AD1k with a bad clock
Post by: gratefulphish on April 22, 2007, 10:32:20 PM

Seems to depend on what rev your AD1K is. From what I read on those posts, and from what I have been looking at, studying linking a V3>MT 24/96 with a 722, any of the inputs, S/PDIF, BNC or AES/EBU will pick up a wordclock signal from another device. I would read the AD1K manual, but it may be as simple as any S/PDIF input doing the trick.

Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: H₂O on April 20, 2007, 03:24:36 PM