Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: thegreatgumbino on May 28, 2007, 11:10:45 AM
-
SSIA. Anyone know off the top or their head or have one available to measure? Thanks.
-
Pretty sure it's 1 x 6 x 3/16". When I was starting out making bars I asked around and it seems to me this was the consensus I got.
-
Just measured mine:
3-3/4" tall (includes mount bar + vertical / tubular base for sliding into a shockmount)
5" long
13/16" deep
with 3/8" holes drilled (centered) at the 1/2", 1-1/4", 1-7/8", 2-1/2"*, 3-1/8", 3-3/4", and 4-1/2" marks on the long (5") dimension.
* center hole for the vertical support bar that drops into an A20/S shockmount.
-
Thanks guys. +T
-
It has been reported that Mrs. Vark (first name Ard) has stated that the Vark bar is not long enough or thick enough, but it's plenty hard.