Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: MSTaper on July 20, 2007, 10:33:32 AM

Title: Mounting DIY T-Bar for CA cards to Dynatran stand
Post by: MSTaper on July 20, 2007, 10:33:32 AM

Does anyone have any advice for mounting a DIY PVC CA cards mic mount on a Dynatran 806A? Could you mount your PVC stand to a 8-12" piece of PVC that would slide onto the stand? Any suggestions would help. rWc3523

Title: Re: Mounting DIY T-Bar for CA cards to Dynatran stand
Post by: rePat on July 20, 2007, 12:17:42 PM

Check the other threads on this topic.  Some guys have pictures of their's in a shockmount, which would screw right on the stand.

Pat

Title: Re: Mounting DIY T-Bar for CA cards to Dynatran stand
Post by: MSTaper on July 20, 2007, 12:29:22 PM

My concern was that someone mentioned the dynatran light stand has a stud mount, not a screw mount. rWc3523

Title: Re: Mounting DIY T-Bar for CA cards to Dynatran stand
Post by: run_run_run on July 20, 2007, 12:38:31 PM

http://www.pictureline.com/products/994/Manfrotto_Standard_Stud_5/8%22M_+3/8%22/

something like that. stud to 3/8s male

Title: Re: Mounting DIY T-Bar for CA cards to Dynatran stand
Post by: rePat on July 20, 2007, 12:54:51 PM

Quote from: russ3523 on July 20, 2007, 12:29:22 PM

My concern was that someone mentioned the dynatran light stand has a stud mount, not a screw mount. rWc3523

I have an 806A, and it is threaded.  It's just smaller than your std shock thread, maybe 1/4", I had to use two threaded adapters to get it up to 5/8".

Pat

Title: Re: Mounting DIY T-Bar for CA cards to Dynatran stand
Post by: MSTaper on July 20, 2007, 12:59:48 PM

Thanks to both of you guys for the help :D :D . I'm going to get one anyway. I'm sure I can rig something with all the suggestions and examples I've seen here. rWc3523

Title: Re: Mounting DIY T-Bar for CA cards to Dynatran stand
Post by: taylordb on July 20, 2007, 08:01:11 PM

here is what i use to mount to the stud:

http://www.bhphotovideo.com/bnh/controller/home?O=details_accessories&A=details&Q=&sku=5357&is=REG&addedTroughValue=5602_REG&addedTroughType=accessory_detail

Title: Re: Mounting DIY T-Bar for CA cards to Dynatran stand
Post by: Brennan on July 20, 2007, 08:52:34 PM

Russ, you kind soul..asking all my questions for me ;D

Title: Re: Mounting DIY T-Bar for CA cards to Dynatran stand
Post by: BobW on July 22, 2007, 04:27:10 AM

Quote from: taylordb on July 20, 2007, 08:01:11 PM

here is what i use to mount to the stud:

http://www.bhphotovideo.com/bnh/controller/home?O=details_accessories&A=details&Q=&sku=5357&is=REG&addedTroughValue=5602_REG&addedTroughType=accessory_detail

Add in "bomiba" adapter and you can go to standard mics threads
http://www.bhphotovideo.com/c/product/284333-REG/Bogen_Manfrotto_MIBA_Female_3_8_to_5_8_.html

Title: Re: Mounting DIY T-Bar for CA cards to Dynatran stand
Post by: jkbyram on July 23, 2007, 09:08:36 AM

1/4-20 to 5/8   this is the adapter you need. you can order it here...http://micsupply.com/standaccessories.htm



i suggest reading this entire website and looking over the various vendors sites. everything you are looking for has been discussed at length here. the search feature can be your friend.